XTransbots XTransbots MX-24 MX24 MX-XXIV Yaguchi(Omnibot Downdrift) X-transbots 17.5cm / 6.9"
$97.99
Features:
This MX-24 Yaguchi by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to Downdrift in the G1 Omnibots line ). It transforms into a white race car of which the doors of the cabin can be open.
Status
2024-11 1st batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 17.5cm / 6.9"
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots MX-48 MX48 MX-XXXXVIII Ratliff ( Ratchet ) X-transbots 22cm / 8.7"
$149.99
Features:
This MX-48 Ratliff by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to Ratchet in the G1 Headmasters line ). It transforms into a white ambulance and comes with several different accessories.
Status
2024-10 In stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 18.5cm Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots MX-47 MX47 MX-XXXXVII Ron ( Ironhide ) X-transbots 22cm / 8.7"
$149.99
Features:
This MX-47 Ron by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to Ironhide in the G1 Headmasters line ). It transforms into a red van and comes with several different accessories.
Status
2024-10 In stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 18.5cm Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots MX-29 MX29 MX-XXIX Fury (Runabout) X-transbots 18.5cm / 7.3"
Sold Out
Features:
This MX-29 Fury by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to Runabout in the G1 Headmasters line ). It transforms into a black race car of which the doors of the cabin can be open / the lights can be popped up / the engine hood can be opened.
Status
2024-2 In stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 18.5cm Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots MX-28 MX28 MX-XXVIII Fast (Runamuck) X-transbots 18.5cm / 7.3"
$95.99
$99.99
Features:
This MX-28 Fast by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to Runamuck in the G1 Headmasters line ). It transforms into a white race car of which the doors of the cabin can be open / the lights can be popped up / the engine hood can be opened.
Status
2024-2 In stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 18.5cm Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots Mini Series MX01 MX-01 Guardian Fuzz (Streetwise, Guardian Defensor Combiner) X-transbots 10cm / 4"
$35.99
Features:
This MX01 by Xtransbots (A famous 3rd party transformer studio) is the 1st transformation robot in its new Mini series.
This set is also a member of the incoming 5-members combiner (in homage to G1 Defensor) and can transform into one leg of the combiner.
Status
2023-12 In stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 10cm (4 Inches) Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
Mini series combiner
XTransbots MX-26A MX26A MX-XXVIa Double Agent Bond & James (Punch-Counterpunch) X-transbots America Version 18.5cm / 7.3"
$92.99
$99.99
Features:
This MX-26A Double Agent Bond & James by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to Punch-Counterpunch in the G1 Headmasters line ). It transforms into a blue race car of which the doors of the cabin can be open.
Status
2023-10 1st batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 18.5cm Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots XTransbots MX-23 MX23 MX-XXIII Fioravanti (Omnibot Overdrive) X-transbots 17.5cm / 6.9"
$99.99
Features:
This MX-23 Fioravanti by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to Overdrive in the G1 Omnibots line ). It transforms into a red race car of which the doors of the cabin can be open.
The whole set includes:
- 1 x main figure
- 3 x weapons
- 6 x laser effect parts
Status
2023-7 1st batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 22cm Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots XTransbots MX-36 MX-XXXVI MX36 Bulwark (Bulkhead) X-transbots 22cm / 8.7"
$114.99
$129.99
Features:
This MX-36 Bulwark by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to G1 Bulkhead ). It transforms into a green armored truck.
This figure is modified from the inferno / grapple mold of Xtransbot.
Status
2023-4 1st batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 22cm Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots MX-22 MX-XXII MX22 Commander Stack ( Ultra Magnus ) X-transbots 27cm / 10.7"
$179.99
Features:
*Note：As per the factory, the mini-pilot figure is not included in the reissue batch.
This MX-22 Commander Stack by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to G1 Ultra Magnus ). It transforms into an armored truck.
The figure is designed following the new MP 2.0 concept and is of much higher articulation than the old generations.
The whole set may includes:
- 1 x Main figure;
- 5 x Changeable faces;
- 1 x Bio card;
- 1 x Matrix of Leadership.
Status
2024-6 Reissue batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot mode 27cm Tall, Truck mode 38.5cm Long
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
Rising Force RF-L01 RFL01 Catfish (Deadend, Menasor) 10cm
$26.99
Features:
This MX-16 Deathwish by XTB / Xtransbots (A famous 3rd party transformer studio) is with its size perfectly matching official MP series (in homage to G1 Deadend). It transforms into a race car and can also combine with other 4 members of the Berserkars (Stunticons) into giant Monolith / Menasor.
Status:
2019-7 In stock
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 16cm (6.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
XTransbots MX-10 MX-X MX10 Virtus ( Springer ) Premium Version X-transbots 24cm / 9.5"
Sold Out
Features: *Note: Shoulder replacement parts are now available. Customers who’s bought this set before pls contact us for the spare part if you want. New should parts would be sent out together with all the new orders. This MX-X Virtus by Xtransbots (A famous 3rd party transformer studio) is a triple changer with its size perfectly matching official MP series (in homage to G1 Springer ). It can transform into a Cybertronian battlecar or an armed helicopter. The whole set may includes: - 1 x Virtus main figure - 1 x Missle (appeared in The Movie 1986) - 2 x Fire effect parts - 1 x Laser pistol (appeared in The Movie 1986) - 1 x Laser pistol (appeared in TV series) - 1 x Only Human mini figure - 1 x Standing base - 1 x Giant sword - 1 x Transparent effect parts for the rotor of Helicopter - 5 x changeable face sculpts (TV...
XTransbots MX-III+ MXIII+ MX-3+ MX3+ Eligos (Cyclonus ) Metallic Version X-transbots 28cm / 11"
Sold Out
Features:
This MX- III+ by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Scourge ). It can transform into a Cybertronian spaceship with vivid metallic painting.
The whole set may include (final content may vary according to the manufacturer):
- 1 x Main figure
- 1 x G1 pistol
- 1 x Laser rifle
- 1 x Target master
- 1 x Katana
- 1 x pilot
- several changeable head sculpts and faces
- Bio card and instructions.
Status
2022-5 In stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
Xtransbots XTB MM-VII MMVII MM-7 MM7 Hatch (Tailgate) Reissue Toy Version 14cm / 5.5"
Sold Out
Features:
This MM-7 Hatch by Xtransbots (A famous 3rd party transformer studio) is a deformation robot with its size perfectly matching official MP series (in homage to G1 Tailgate). It can transform into a race car.
Note: Our stock is toy version, so the legs are of Silver color.
Status：
2022-3 New batch in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 14cm (5.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MM-VI MMVI MM-6 MM6 Boost (Windcharger) Reissue Toon Version ( Silver Leg) 14cm / 5.5"
Sold Out
Features:
This MM-6 Boost by Xtransbots (A famous 3rd party transformer studio) is a deformation robot with its size perfectly matching official MP series (in homage to G1 Windcharger). It can transform into a race car.
Note: Our stock is toon version, so the legs are silver.
Status:
2022-3 New batch in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 14cm (5.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MM-XII MMXII MM-12 MM12 Neptune ( Seaspray, MP Scale ) X-transbots 12cm / 5"
Sold Out
Features:
*Note: A few sets in stock on sale, no post-sale service can be offered according to the factory.
This MM - XII Neptune by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Seaspray ). It transforms into a hovercraft with water skiing accessories which can be connected to MP21 Bumblebee (not included in this set)
Whole set includes:
1 × Neptune main figure 1 × Weapon 1 × Water skiiing parts 2 × Water effect parts
Status:
2022-2 A few sets in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 12cm (5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
Xtransbots XTB MM-VIIIG2 MMVIIIG2 MM-8G2 MM8G2 Arkose Metallic Version ( Beachcomber, MP Scale ) X-transbots 12cm / 5" G2 Green Metallic Version
Sold Out
Features:
*Note: A few sets on sale, no post-sale service can be offered.
This MM - VIII Arkose by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Beachcomber ). It transforms into a Chenowth FAV.
Whole set includes:
1 × Arkose main figure1 × Weapon1 × Changeable golden fist1 × Changeable mask3 × Bird Figures
Status:
2022-2 A few sets in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 12cm (5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
Xtransbots XTB MM-VIII MMVIII MM-8 MM8 Arkose Metallic Version ( Beachcomber, MP Scale ) X-transbots 12cm / 5"
Sold Out
Features:
*Note: A few sets on sale, no post-sale service can be offered.
This MM - VIII Arkose by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Beachcomber ). It transforms into a Chenowth FAV.
Whole set includes:
1 × Arkose main figure1 × Weapon1 × Changeable golden fist1 × Changeable mask3 × Bird Figures
Status:
2022-2 A few sets in stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 12cm (5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
XTransbots MX-27 MX-XXVII MX27 Janssen ( Perceptor ) X-transbots
Sold Out
Features:
This MX-27 Janssen by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to G1 Perceptor ). It transforms into a microscope.
The whole set may includes:
- 1 x Main figure;
- 5 x Changeable faces;
- 1 x New comic headsculpt;
- 3 x Mini robot figures;
- 1 x Mini telescope figure;
- 1 x Rifle
- 1 x laser pistol
- 1 x Missle launcher
- 1 x Beaker
- 1 x Test tube
- 1 x Fire effect part
Status
2022-1 New batch in stock.
Parameters:
Producer
Xtransbots
Size
Unknown
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots MX-33 MX33 Jocund (Groove, Defensor Combiner) X-transbots 17cm / 6.7"
$99.99
Features:
This MX-33 by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Groove). It can transform into a police motorcycle.
This set is also a member of the incoming 5-members combiner (in homage to G1 Defensor) and can transform into one leg of the combiner.
The whole set includes:
- 1 x Laser pistol
- 2 x Machine guns
- 3 x changeable faces
- 1 x Main figure of Jocund
Status
2021-11 In stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 17cm (6.7 Inches) Tall, Combiner mode 50cm tall.
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
Xtransbots XTB MM-X Toro (Cliffjumper, MP Scale) X-transbots
Sold Out
Features:
This MM-X Toro by Xtransbots (A famous 3rd party transformer studio) are transformable robots with its size perfectly matching official MP series (in homage to G1 Cliffjumper). It transform from robot into a red race car which can also be installed with skiing boards.
Whole set includes:
- 1× weapon rack(a floating pad) - 1× Cannon - 1× car loaded gun - 2× combinable rod - 1× hand gun - 1× water gun - 1× car loaded antenna
Status:
2021-8 Reissue batch in stock.
Parameters:
Producer
Xtransbots / XTB
Size
Unknown
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MM-IXZ MMIXZ MM-9Z MM9Z Barada (Cosmo) Blue Version 12cm / 4.5"
Sold Out
Features:
This MM-9Z Barada by Xtransbots (A famous 3rd party transformer studio) is an transformable robot with its size perfectly matching official MP series (in homage to G1 Cosmo). It can transform into a blue UFO.
Status:
2021-7 A few stock on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 12cm (4.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MX-8T MX8T Aegis (Trailbreaker, MP Scale) Cartoon Version X-transbots 20cm/8''
$129.99
Features:
This MX-8T Aegis by Xtransbot (A famous 3rd party transformer studio) is a deformation robot with its size perfectly matching official MP series (in homage to G1 Trailbreaker). It can transform into a black SUV.
Highlights in design (comparing to the original version):- Arms can now be 360 rotated; - 3 new faces are added (2 head sculpts + 5 faces in total);- Some buckles are adjusted to optimize the transformation;- Fully polished car-painting with metallic finishing;- Redesigned poseable hands;- Windown color changed to transparent blue.
Status:
2021-7 Reissue batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 20cm (8 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
XTransbots MX-30 MX30 Fuzz (Streetwise, Defensor Combiner) X-transbots 17cm / 6.7"
$99.99
Features:
This MX-30 by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Streetwise). It can transform into a police car.
This set is also a member of the incoming 5-members combiner (in homage to G1 Defensor) and can transform into one leg of the combiner.
The whole set includes:
- 1 x Laser pistol
- 3 x changeable faces
- 1 x Main figure of fuzz
Status
2021-5 In stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
Xtransbots XTB MX-12A Gravestone Motormaster (Monolith / Menasor Combiner, Stunticons)
Sold Out
Features:
This MX-12A Gravestone by XTB / Xtransbots (A famous 3rd party transformer studio) is with its size perfectly matching official MP series (in homage to G1 Motormaster). It transforms into a mighty truck and can also combine with other 4 members of the Berserkars (Stunticons) into giant Monolith / Menasor.
According to the latest information released, it is said that the MX-12B Convoy would be a triple -changer (Convoy, Decepticon base, Skeleton of the Menasor), and is fully compatible with MP / Xtransbot Vehicles.
This link is for MX-12A truck head only, buy link for MX-12B Convoy pls check below:
MX-12B Convoy for Gravestone Motormaster
Status:
2021-4 Reissue batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. height close to MP10
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MX-12B Convoy for Gravestone Motormaster (Monolith / Menasor Combiner, Stunticons)
Sold Out
Features:
This MX-12 Gravestone by XTB / Xtransbots (A famous 3rd party transformer studio) is with its size perfectly matching official MP series (in homage to G1 Motormaster). It transforms into a mighty truck and can also combine with other 4 members of the Berserkars (Stunticons) into giant Monolith / Menasor.
According to the latest information released, it is said that the MX-12B Convoy would be a triple -changer (Convoy, Decepticon base, Skeleton of the Menasor), and is fully compatible with MP / Xtransbot Vehicles.
This link is for MX-12B the Convoy only. Buy link for MX-12A the truck head is as below:
MX-12A Gravestone Truck Head
Status:
2021-2 In stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. height close to MP10
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
XTransbots MX-18E MX18E MX-XXVIII Dr.Egg ( Quintesson ) X-transbots 25cm / 10"
Sold Out
Features:
This MX-18E Dr.Egg by Xtransbots (A famous 3rd party transformer studio) is perfectly matching with official MP series with its size.
This figure featuring:
- Vivid metallic paint finish
- Super posable tentacles made by copper wire.
- Die-cast parts added for the shell.
- Light and sound effects can be controlled with either remote controller or the button on the body.
- LED eys which can be lighted up.
- The figure is rotatable and pre-installed with voice chip (classic speeches is recorded)
- All faces of the figure are detachable and re-assembleable.
This figure is NOT pre-installed with any batteries, pls prepare the following batteries by yourself.
Rechagable lithium battery for main figure, battery code: 14500,
Button batteries for warship remote controller, battery code: LR626*3.
Status
2020 -12 In stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 24cm (10.5 Inches) Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
XTransbots MX-11 MX-XI Locke ( Kup ) X-transbots 19cm / 7.5"
Sold Out
Features:
Note: Current batch is the reissue batch with improved quality and minor defects from the 1st batch fixed.
This MX-XI by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Kup ). It can transform into a Cybertronian truck.
The whole set may includes:
- 3 x changeable face
- 1 x Sharkticon tail
- 1 x Laser gun
- 2 x Target masters
- 2 x changeable hands.
Status
2021-10 Reissue batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 23cm (10 Inches) Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
Xtransbots XTB MX-9T MX9T Paean (Hoist, MP Scale) Cartoon Version X-transbots 20cm/8''
Sold Out
Features: This MX-9T Hoist by Paean (A famous 3rd party transformer studio) is a deformation robot with its size perfectly matching official MP series (in homage to G1 Hoist). It can transform into a green pick-up truck. Highlights in design: - 8 Inches (about 20.5cm) tall in Robot mode - Rubber Tyres & diecast joints and feet - Translucent window & car lights - Fully polished car-painting with metallic finishing - Towing gimmic back of the truck Whole set includes: 1 × main figure 1 × solar tower 2 × movie masks (MP26 tracks and Paen, one for each) 1 × Wrist Hammer 1 × Wrist Missle Launcher 2 × Wrist MP weapon adaptors - Claw arm 2 × Long mechanic arms 1 × Wrist laser gun 1 × bio card Status: To be released in the 4th quarter of 2020. Full payment acceptable as deposit. Shipment would be done once product is in stock. Parameters: Producer...
XTransbots MX-IIT MX-2T MXIIT MX2T Andras ( Scourge ) G1 Cartoon Version X-transbots 23cm / 10"
Sold Out
Features:
This MX- IIT by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Scourge ). It can transform into a Cybertronian spaceship with vivid painting.
Status
2024-1 A few sets on sale.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 23cm (10 Inches) Tall
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
Xtransbots XTB MM-IV+ MMIV+ MM-4+ MM4+ Ollie Version 2.0 Reissue ( Wheelie, MP Scale ) X-transbots 12cm / 5"
Sold Out
Features: This MX- IV+ Ollie by Xtransbots (A famous 3rd party transformer studio) is a transformation robot with its size perfectly matching official MP series (in homage to G1 Wheelie ). It can transform into a small orange Cybertronian race car with vivid painting. Whole set includes: 1 × Ollie main figure 1 × Slingshot 1 × Blaster gun 1 × Changeable face The Version 2.0 has inherited the good quality of V1, plus the following improvement. - 2 vulnerable parts on the flanks of the vehicle modes have been enhanced. - Heels added to improve the stability when standing. - Added space to make it easier moving out the fist in transformation. - Increase the tightness of the knee joints. - Added movable crotch piece - Improved the rollability of the wheels. - Cancelled the rotation stopper at the elbows of the vehicle modes - Elbow joints are now able to pose 90° - Enhanced loose joints on the...
Xtransbots XTB MX-XV MXXV MX-15 Deathwish Deadend (Monolith / Menasor Combiner, Stunticons) MX15 16cm / 6.5"
Sold Out
Features:
This MX-16 Deathwish by XTB / Xtransbots (A famous 3rd party transformer studio) is with its size perfectly matching official MP series (in homage to G1 Deadend). It transforms into a race car and can also combine with other 4 members of the Berserkars (Stunticons) into giant Monolith / Menasor.
Status:
2019-7 In stock
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 16cm (6.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MX-XVI MXXVI MX-16 Overheat Drag Strip (Monolith / Menasor Combiner, Stunticons) MX16 16cm / 6.5"
Sold Out
Features:
This MX-16 Overheat by XTB / Xtransbots (A famous 3rd party transformer studio) is with its size perfectly matching official MP series (in homage to G1 Drag Strip). It transforms into a F1 Formula race car and can also combine with other 4 members of the Berserkars (Stunticons) into giant Monolith / Menasor.
Status:
2019-7 In Stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 16cm (6.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MX-XIII MX-13 Crackup Breakdown (Monolith / Menasor Combiner, Stunticons) MX13 16cm / 6.5"
Sold Out
Features:
This MX-13 Crackup by XTB / Xtransbots (A famous 3rd party transformer studio) is with its size perfectly matching official MP series (in homage to G1 wildrider). It can transform into a race car and can also combine with other 4 members of the Berserkars (Stunticons) into giant Monolith / Menasor.
The figure features rubber tyres, diecast parts, clear car windows and ratchet joints.
Whole set includes:
1 × Main figure1 × Laser Pistol
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 16cm (6.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MX-XIV MX-14 Flipout Wildrider (Monolith / Menasor Combiner, Stunticons) MX14 16cm / 6.5"
Sold Out
Features:
This MX-14 Flipout by Xtransbots (A famous 3rd party transformer studio) is with its size perfectly matching official MP series (in homage to G1 wildrider). It can transform into a race car and can also combine with other 4 members of the Berserkars (Stunticons) into Giant Monolith / Menasor.
The figure features rubber tyres, diecast parts, clear car windows and ratchet joints.
Whole set includes:
1 × Main figure1 × Laser Pistol
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 16cm (6.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MM-X Toro MM-XI Coprimozzo (Cliffjumper, Hubcup, MP Scale) X-transbots
Sold Out
Features:
This MM-X Toro and MM-XI Coprimozzo by Xtransbots (A famous 3rd party transformer studio) are deformation robots with its size perfectly matching official MP series (in homage to G1 Cliffjumper and Hubcup). Both of them are of the same mould with different color, tranforming from robot into race cars.
Whole set includes:
- 1× weapon rack(a floating pad) - 1× Cannon - 1× car loaded gun - 2× combinable rod - 1× hand gun - 1× water gun - 1× car loaded antenna
Parameters:
Producer
Xtransbots / XTB
Size
Unknown
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size
Xtransbots XTB MX-17 MX17 Savant (Skids, MP Scale) X-transbots 16cm/6.5'
Sold Out
Features:
This MX-17 Savant by Xtransbots (A famous 3rd party transformer studio) is a deformation robot with its size perfectly matching official MP series (in homage to G1 Skids). It can transform into a small blue sedan with vivid painting.
Highlights in design:- 3 doors can be opened in the alt mode of the Dirac mode - Seats inside sedan - Steering wheel - Moped bike compatible inside the trunk - Ab crunch of the Dirac robot mode - Die cast parts used in thighs/feet, torso and weak connectors- Rubber tyres - Tinted black window - Metallic painted car shell, with texture very close to a real car- Double joints in Knees
Whole set includes:2 × shot guns. 1 × Moped bike1 × Bio card.
Status:
2023-12 Reissue batch in stock.
Parameters:
Producer
Xtransbots
Size
Robot Form Approx. 16cm (6.5 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
MP Size