Transform and Rollout TR-02A TR02A Commander of Stars (Transformers Galaxy Force Optimus Prime) Galaxy Convoy EX Painting Version 24cm / 9.5mm
$149.99
Features: *Note: (1) The broken finger issue with the original version is said to be fixed in this new TR-02A version; (2) The shoulder joint issue with the original version is said to be fixed in this new TR-02A version. The 2nd figure brought by Transform and Rollout (TR) after TR Hova (Jazz). It transforms into a Cybertronian truck with heavily armed convoy. The vehicle mode is 36cm / 14" long (with convoy), while the convoy can also be transformed and combined with robot mode. Other details unknown yet. The current version would be an upgraded version with improvement as below: - Missle bays added to the upper side of the backpack. - Air nozzles added to the convoy - LED light effects added to the cannon / Matrix-leadership with magnet switch. - 142 moveable parts (including 20 POM ratchet sets + 14 die-cast ratchet sets ) in total on the...
【Pre-Order】FansHobby FH MB-21 MB21 (Armada Universe Tidal Wave)
$2.00
Features:
This MB-21 in homage to the classic image of Tidal Wave from Transformers: Armada universe is brought by Fanshobby (Famous 3rd party transformer studio)
It can transform into a heavily-armed space jet carrier. It can also be combined together with Fanshobby MB-17 to form the ultimate mode of the figure.
Status:
To be released in late 2024 - early 2025. Full price unknown yet.
Parameters:
Producer
Fanshobby
Size
Robot Height is unknown yet
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-26 MB26 The Saber Team (Armada Universe Star saber Mini-con) 3 in 1 set
$44.99
Features:
*Note: The MB-15 figure on the photos are for display only and NOT included in the set.
This MB-26 the Saber team in homage to the classic image from Transformers: Armada universe is brought by Fanshobby (Famous 3rd party transformer studio)
All of the 3 mini robots can transform into mini jet fighter and combine into the star saber.
Status:
2024-7 1st batch in stock.
Parameters:
Producer
Fanshobby
Size
Unknown
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-22 MB22 Sky Flame(Armada Universe Jetfire) 26cm / 10.2"
$159.99
Features:
This MB-22 Sky Flame in homage to the classic image of Jetfire from Transformers: Armada universe is brought by Fanshobby (Famous 3rd party transformer studio)
It can transform into a heavily-armed trailer. It can also be combined together with Fanshobby MB-15 (as its shoulder cannon)
Status:
2024-5 1st batch in stock.
Parameters:
Producer
Fanshobby
Size
Robot Height 24cm / 9.4“, MP size
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-20 MB20 X-Load(Overload) 24cm / 9.5"
$144.99
$145.99
Features:
This MB-20 X-Load in homage to the classic image of Overload from G1: Super God Master Force line is brought by Fanshobby (Famous 3rd party transformer studio)
It can transform into a heavily-armed trailer. It can also be combined together with Fanshobby MB-15 (as its shoulder cannon) and MB-22 Sky flame (as its carrier)
Status:
2024-2 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Height 24cm / 9.4“, MP size
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-08A MB08A Double Devil A (Overlord) Special Version Reissue 38cm / 15"
$239.99
Features:
*Note: The current reissue version features new color scheme and 2 new head masters (4 in total).
This MB-08 Double Devil, in homage to the classic image of Overlord in G1: Pretender. The best MP-size Overlord ever. This is a 2 in 1 set.
Status:
2024-2 Reissue batch in stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 38cm (15 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Can be combined with MB-06 and other figure from the same mould.
FansHobby FH MB-24A MB24A Dark Strike(Hydra / Darkwing) 23.5cm / 9.3"
$139.99
Features:
This MB-24A Dark Strike in homage to the classic image of Hydra / Dreadwind from G1: Super God Master Force line is brought by Fanshobby (Famous 3rd party transformer studio)
It can transform into a heavily-armed jet fighter. It can also be combined together with Fanshobby MB-23.
Status:
2024-1 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Height 23.5cm / 9.3“, MP size
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-24 MB24 Lernaean(Hydra / Dreadwind) 23.5cm / 9.3"
$139.99
Features:
This MB-24 Lernaean in homage to the classic image of Hydra / Dreadwind from G1: Super God Master Force line is brought by Fanshobby (Famous 3rd party transformer studio)
It can transform into a heavily-armed jet fighter. It can also be combined together with Fanshobby MB-23.
Status:
2024-1 In stock.
Parameters:
Producer
Fanshobby
Size
Unknown, MP size
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-23A MB23A Fright Storm (Buster / Dreadwind) 23.5cm / 9.3"
$119.99
Features:
This MB-23A Destoyer in homage to the classic image of Buster / Dreadwind from G1: Super God Master Force line is brought by Fanshobby (Famous 3rd party transformer studio)
It can transform into a heavily-armed jet fighter.
Status:
2023-9 In stock.
Parameters:
Producer
Fanshobby
Size
Unknown, MP size
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-17A MB17A Galva-Tyranno (Armada Megatron) Master Build Purple Version 29.5cm
Sold Out
Features:
*Note: This is the MB-17A version with a different color scheme.
This MB-17A figure in homage to the classic image of Megatron (Armada) in the Unicron Trilogy line is brought by Fanshobby (Famous 3rd party transformer studio)
According to current information, this figure features as below:
- It transforms into a heavily armed tank.
- The disguise mode is designed with several cabins and extendable deck which allows it to interact with the robot pilot that would come together with the figure, as well as other legends class figures.
- The robot pilot itself can transform into an armed Jeep.
- The turret is rotatable, main cannon lightable and fireable (manually)
- The tank mode is equipped with real rubber tracks.
Status:
2023-7 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 29.5cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-23 MB23 Destroyer (Buster / Dreadwind)
$119.99
Features:
This MB-23 Destoyer in homage to the classic image of Buster / Dreadwind from G1: Super God Master Force line is brought by Fanshobby (Famous 3rd party transformer studio)
It can transform into a heavily-armed jet fighter.
Status:
2023-5 In stock.
Parameters:
Producer
Fanshobby
Size
Unknown, MP size
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MakeToys MT MTRM-16 MTRM16 Jetstream(Thrust) MTRM-17 MTRM17 Booster (Ramjet) 25cm / 10"
$134.99
Features:
*Note: This product link includes 2 different buy options. Pls make sure you choose the right one you want.
MTRM-16 Jetstream & MTRM-17 Booster are the latest figures in their Remastered Series by MakeToys (Famous 3rd party transformers Studio.) They transform into Jet fighters. The figures are designed in homage to G1 Thrust and Booster.
Status:
2023-5 1st batch in stock.
Parameters:
Producer
MT / MakeToys
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP size
FansHobby FH MB-19B MB19B Doubledealer (Doubleclouder) Purple Wing Version 32cm / 12.6“
Sold Out
Features:
Note: This is the MB-19B Purple Wing Version.
This MB-19B Doubledealer in homage to the classic image of Doubledealer from G1: Super God Master Force line is brought by Fanshobby (Famous 3rd party transformer studio)
It is a tripe-changer which can transform into a missle carrier as well as a heavily armed mechanic hawk. It also comes with 2 target masters with enhanced details.
Status:
2023-2 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 32cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-19A MB19A Doubledealer (Doubleclouder) Blue-green Wing Version 32cm / 12.6“
Sold Out
Features:
Note: This is the MB-19A Blue Green Wing Version.
This MB-19A Doubledealer in homage to the classic image of Doubledealer from G1: Super God Master Force line is brought by Fanshobby (Famous 3rd party transformer studio)
It is a tripe-changer which can transform into a missle carrier as well as a heavily armed mechanic hawk. It also comes with 2 target masters with enhanced details.
Status:
2023-5 Reissue batch in stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 32cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-18 MB18 Energy Commander (Energon Optimus Prime) 32cm / 12.6“Fans Hobby
Sold Out
Features:
This MB-18 Energy Commander in homage to the classic image of Energon Optimus Prime in the Unicron Trilogy line (from the Prime Force)is brought by Fanshobby (Famous 3rd party transformer studio)
According to current information, this figure includes:
1 x Core robot
1 x Trailer
4 x Transformable Vehicles
1 x Main weapon
features as below:
- High articulation & MP size
- The 4 limbs of the combiner (transformed by the members) can switched with each other freely.
Status:
2022-11 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 28cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Transform and Rollout TR-02 TR02 Commander of Stars (Transformers Galaxy Force Optimus Prime) Galaxy Convoy 24cm / 9.5mm
Sold Out
Features: *Important Note: The current stock would go with the replacement fingers with instruction as below, it is the solution offered by the factory if you found your figure comes with broken fingers. Customers who still want replacement fingers pls contact us at tfsafari2002@gmail.com Instruction Translation: (1) Stretch out the broken fingers; (2) Remove the thumb VERTICALLY against the palm; remove other fingers HORIZONTALLY against the palm (in these directions the fossas are bigger, Needlenose pliers can be used); (3) Fingers broken on the root can also be removed by needle-nose pliers. (4) Insert the new thumb VERTICALLY against the palm; (5) Insert other fingers HORIZONTALLY against the palm. New fingers can be installed one by one. The 2nd figure brought by Transform and Rollout (TR) after TR Hova (Jazz). It transforms into a Cybertronian truck with heavily armed convoy. The vehicle mode is 36cm / 14" long (with convoy), while the convoy...
MakeToys MT MTCD-04 MTCD04 Divine Shooter (God Ginrai Trailer Robot) 24cm / 9.5"
$84.99
$99.99
Features:
*Note: We may not be able to offer post-sale service for this set according to the factory. Defects would be compensated by store points
MTRM-04 Divine Shooter is made by MakeToys (Famous 3rd party transformers Studio.) following the classic image of God Ginrai (Trailer)
Whole set includes:
- 1 x Divine Shooter Figure
- 2 x Blaster Rifles
- 1 x Giant Missile
Status:
2022-6 Reissue batch in stock.
Parameters:
Producer
MT / MakeToys
Size
24cm / 9.5"
Material
ABS Plastic
Shipment
From China
Note
Nemesis God Ginrai
MakeToys MT MTCD-03 MTCD03 Thunder Manus (God Ginrai ) + Divine Suit Box Set 24cm / 9.5"
Sold Out
Features:
*Note: We may not be able to offer post-sale service for this set according to the factory. Defects would be compensated by store points
MTRM-03 Thunder Manus is made by MakeToys (Famous 3rd party transformers Studio.) following the classic image of God Ginrai.
Whole set includes:
- 1 x Thunder Magnus Figure
- 2 x Blaster Rifles
- 1 x Divine Armor set
Status:
2022-6 Reissue batch in stock.
Parameters:
Producer
MT / MakeToys
Size
24cm / 9.5"
Material
ABS Plastic
Shipment
From China
Note
Nemesis God Ginrai
Transform and Rollout TR-01 TR01 Hova (Jazz) 20cm / 8"
Sold Out
Features:
Transorm and Rollout (TR) is a brand-new studio however they've done a great job on this TR01 Jazz, a good figure to play with and a interesting addition to your showcase before the official release of MP Jazz.
- MP Size- Perfect Representation of G1 Jazz. - Features a grappling hook with a pull back mechanism
Status:
2023-7 Reissue batch in stock.
Parameters:
Producer
Transorm and Rollout (TR)
Size
Robot Form Approx. 20cm (8 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size, Original Design
GigaPower GP HQ-05R HQ05R Gaudenter (Swoop) Blue Chrome Version Giga Power 26cm / 10.5"
Sold Out
Features: Note: *Current batch DOES NOT include the special bonus (sold out,Spot lights and remote control). HQ05R Gaudenter (in homage to Dinobot Swoop)is the latest master piece brought by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure). For Gaudenter GP has been keeping its consistent quality and design. A must-buy collection for your show case. Whole set includes: - 1 × Main body- 2 × Cannons- 2 × Swords- 2 × Heads- 1 × Bird Mode Head- 1 × Transparent protecting box- 1 × Platform- 1 × Bracket Other FIgures includes in the photos are only for comparison and not included in this toy set. The toy doesn't includes battery for the light effect. Battery spec: 2 × CR1025 for sword Status: 2022-3 New batch in stock. Parameters: Producer Gigapower (GP) Size Robot Form Approx. 26cm (10.5 Inches) Tall Material ABS + Alloy / Diecast...
FansHobby FH MB-17 MB17 Meg-Tyranno (Armada Megatron) Master Build 29.5cm
Sold Out
Features:
*Note: Some robot figures in the product photos are for display only, not included in the set.
This MB-17 figure in homage to the classic image of Megatron (Armada) in the Unicron Trilogy line is brought by Fanshobby (Famous 3rd party transformer studio)
According to current information, this figure features as below:
- It transforms into a heavily armed tank.
- The disguise mode is designed with several cabins and extendable deck which allows it to interact with the robot pilot that would come together with the figure, as well as other legends class figures.
- The robot pilot itself can transform into an armed Jeep.
- The turret is rotatable, main cannon lightable and fireable (manually)
- The tank mode is equipped with real rubber tracks.
Status:
2022-2 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 29.5cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-14 MB14 Kap (MP Hosehead) Master Build
Sold Out
Features:
This MB-14 Kap, in homage to the classic image of Hosehead is brought by Fanshobby (Famous 3rd party transformer studio)
This set is of vivid painting fitting, and in accordance with the size of official MP line. It transforms into a red fire engine. It also comes with a robot pilot which can fit in to the cabin as the driver.
Status:
2022-1 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 17cm (6 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
GigaPower GP HQ-01R HQ01R Superator (Grimlock) Chrome Version Giga Power 29cm / 11.5"
Sold Out
Features: HQ01R Superator (in homage to Dinobot grimplock) by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure). A must-buy collection for your show case to make up a full dinobot team from Gigapower. This set is the chrome version Whole set includes: - 1 × Main body- 1 × Laser gun- 1 × Sword This product might overweight so the delivery would take longer time like 15-30 business days (average, time may vary for different areas and is depending on the luck and efficiency of local postal service) Other FIgures includes in the photos are only for comparison and not included in this toy set. The toy doesn't includes battery for the light effect. Status: 2021-11 Reissue batch in stock. Parameters: Producer Gigapower (GP) Size Robot Form Approx. 26cm (10.5 Inches) Tall Material ABS + Alloy / Diecast parts Shipment From China Note Maybe the...
MakeToys MT MTCD-05 MTCD05 Buster Skywing (Jet Fire) White Version
Sold Out
Features:
*Note: We may not be able to offer post-sale service for this set according to the factory. Major defects would be compensated by store points.
MTRM-05 Buster Skywing is made by MakeToys (Famous 3rd party transformers Studio.)
The unique selling point is that this figure can be combined with the following figure (1:1 KO version of MTCD01 Optimus Prime) as its armor:
Legend Toys LT03 Optimus Prime
Whole set includes:
- Buster Skywing figure
- 2 x Cannons
- 1 x Blaster
- 1 x Sword
Status:
2021-10 A few sets in stock on sale.
Parameters:
Producer
MT / MakeToys
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
MakeToys MT MTCD-03SP MTCD03SP Thunder Erebus (God Ginrai ) Nemesis Version
Sold Out
Features:
*Note: We may not be able to offer post-sale service for this set according to the factory. Defects would be compensated by store points
MTRM-03SP Thunder Erebus is made by MakeToys (Famous 3rd party transformers Studio.)
Whole set includes:
- Thunder Erberus Figure
- Transforming Trailer
- Mini Figure
- 2 Particle Rifles
- 2 Small Blaster Rifles
- 2 Large Blaster Rifles
- Instruction Manual
Status:
2022-12 New batch in stock on sale
Parameters:
Producer
MT / MakeToys
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Nemesis God Ginrai
FansHobby FH MB-13 MB13 Ace Hitter (MP Gun Shooter) Master Build
Sold Out
Features:
This MB-13 Ace Hitter, in homage to the classic image of Gun Shooter is brought by Fanshobby (Famous 3rd party transformer studio)
This set is of vivid painting fitting, and in accordance with the size of official MP line. It transforms into a white police car. It also comes with a robot pilot which can fit in to the cabin as the driver.
Status:
2021-9 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 17cm (6 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
FansHobby FH MB-12A MB12A Nite Walker (MP Nightbeat) Master Build
Sold Out
Features:
This MB-12A Nite Walker, in homage to the classic image of Nightbeat is brought by Fanshobby (Famous 3rd party transformer studio)
This set is of vivid painting fitting, and in accordance with the size of official MP line. It transforms into a blue race car.
Status:
2021-7 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 17cm (6 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Female robot
FansHobby FH MB-11 MB11 God Armor (God Bomber) Master Build Original Version Reissue
Sold Out
Features:
This MB-11 God Armor, in homage to the classic image of God Bomber in G1: Pretender would be reissued soon.
This set is of vivid painting fitting, and in accordance with the size of official MP line. It can be combined with MB-06 Power Master / MB-06C V2 Power Master / MB-16 Lightning Eagle.
Status:
2021-7 Reissue batch in stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 32cm (12.5 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Can be combined with MB-06 and other figure from the same mould.
Gigapower GP HQ-03R HQ03R Guttur (Snarl) Chrome Version Reissue 28cm
Sold Out
Features:
HQ-03R Guttur (Snarl) is the chrome version reissue of the master piece HQ-03 by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure).
Most coordinated size with offical MP series toys, with excellent details in design. You will also be surprised by the movability of such a huge dinobot. A must-buy collection for your show case.
Whole set includes :
1 x Laser Gun1 x Red Sword1 x Laser Cannon1 x Changeable Robot Head 2 x Changeable transparent visors
Other FIgures includes in the photos are only for comparison and not included in this toy set.
Status:
2021-6 In stock.
Parameters:
Producer
Gigapower (GP)
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS + Alloy / Diecast parts
Shipment
From China
Note
May be the best dinobot ever.
GigaPower GP HQ-02R HQ02R Grassor (Slag) Chrome Version Reissue 28cm
Sold Out
Features: *Note: Reissue version doesn't include fire effect part. HQ-02R Grassor (Slag) is the chrome version reissue of the master piece HQ-02 by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure). Most coordinated size with offical MP series toys, with excellent details in design. You will also be surprised by the movability of such a huge dinobot. A must-buy collection for your show case. Whole set includes: 1 x Red Sword1 x Laser Cannon1 x Changeable Red Head 5 x Changeable Plastic Visors2 x Red Horns Other FIgures includes in the photos are only for comparison and not included in this toy set. Status: 2021-3 To be released in April - May. Full price at USD199.99. Pre-order customer get special price at USD194.99 (Final price may vary if factory change the ex-work price). Parameters: Producer Gigapower (GP) Size Robot Form Approx. 28cm (11 Inches) Tall Material ABS +...
FansHobby FH MB-08 MB08 Double Devil (Overlord) Reissue 30cm / 12"
Sold Out
Features:
This MB-08 Double Devil, in homage to the classic image of Overlord in G1: Pretender. The best MP-size Overlord ever. This is a 2 in 1 set.
Status:
2022-5 Reissue batch in stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 32cm (12.5 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Can be combined with MB-06 and other figure from the same mould.
BadCube BC OTS-14 OTS14 Warrior Steamroll (Sideswipe) 18cm / 7"
Sold Out
Features:
This OTS-14 Warrior Steamroll by BadCube (3rd party transformer studio) is a MP sized robot, always go together with his brother Recon (These two robots look the same but of a lot of difference in details and accessories, not just simple redecos. )
Highlights in design:- Baking Finish painting - Rifle can be hidden under the carriage, shoulder cannons can also be hidden directly into the vehicle during transformation- Openable doors, bonnet, head lights, changeable faces for the robot form - 4 rotatable high quality silicone tires.- better proportion (narrower) chest, thinner legs, closer to the Classic G1 image of red alert.
Whole set includes:1× changeable face1× rifle4 × different type of weapons / tools (changeable)1 × jetpack
Status:
2021-3 A few sets in stock.
Parameters:
Producer
BadCube (BC)
Size
Robot Form Approx. 18cm (7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
FansHobby FH MB-12 MB12 Athena (MP Minerva) Master Build
Sold Out
Features:
This MB-12 Athena, in homage to the classic image of Minerva is brought by Fanshobby (Famous 3rd party transformer studio)
This set is of vivid painting fitting, and in accordance with the size of official MP line. It is a female robot transforming into a police car.
Status:
2020-10 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 17cm (6 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Female robot
FansHobby FH MB-16 MB16 Lightning Eagle (Thunderclash) 32cm / 12.5"
Sold Out
Features:
This is a remold version of MB-06 Power Baser, in homage to Thunderclash in the IDW comic.
This set is of vivid painting fitting to the size of official MP line and can also be combined with MB-06 God Armor.
Status:
2020-3 in stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 32cm (12.5 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Remold of MB-06 Power Baser
MakeToys MT MTRM-15 MTRM15 Endgame (Dirge) 25cm / 10"
Sold Out
Features:
MTRM-15 Endgame is the latest figure in their Remastered Series by MakeToys (Famous 3rd party transformers Studio.) It transforms into a Jet fighter.
Whole set includes:
1 × Toy Figure
2 × Weapons
3 × Changeable faces
1 × MTRM-11 Meteor Wing Filler Kit
Status:
2019-12 In stock.
Parameters:
Producer
MT / MakeToys
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP size
GigaPower GP HQ-02 HQ02 Grassor (Slag) Metallic Version 28cm / 11"
Sold Out
Features: HQ-02 Grassor is the metallic version of G1 Slag (member of Dinobots) by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure). Most coordinated size with offical MP series toys, with excellent details in design. You will also be surprised by the movability of such a huge dinobot. A must-buy collection for your show case. The whole set of metallic version includes: 2 × Rockets1 x Red Sword with LED1 x Laser Cannon with LED1 x Changeable Red Head with LED2 × Changeable Faces with different expressions5 x Changeable Plastic Visors2 x Red Horns 2 × Fire effect parts (special gift for metallic version) Batteries are not included in the set. You need to buy separately.Battery Type for weapons: Panasonic CR1025 Battery Type for head: AG Other FIgures includes in the photos are only for comparison and not included in this toy set. *This toy is extremely heavy...
Gigapower GP HQ-03 HQ03 Guttur (Snarl) Metallic Version Giga Power 28cm / 11"
Sold Out
Features: HQ-03 Guttur (Snarl) is the Metallic version of the master piece HQ-03R by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure). Most coordinated size with offical MP series toys, with excellent details in design. You will also be surprised by the movability of such a huge dinobot. A must-buy collection for your show case. Whole set includes: 1 x Laser Gun1 x Red Sword1 x Laser Cannon1 x Changeable Robot Head 2 x Changeable transparent visors * 5 × Fire effect part is included as special gift for Metallic version Other FIgures includes in the photos are only for comparison and not included in this toy set. *This toy is extremely heavy so we apply large package delivery method which is more economic and reliable, it is still free but takes around 15-25 business days to US,Australia and main countries in Europe (exact time span is upon to the postal service provider). Parameters:...
GigaPower GP HQ-01 HQ01 Superator (Grimlock) Metallic Version Giga Power 29cm / 11.5"
Sold Out
Features:
HQ01 Superator (in homage to Dinobot grimplock) by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure).
A must-buy collection for your show case to make up a full dinobot team from Gigapower. This set is the metallic version.
Whole set includes:
- 1 × Main body- 1 × Laser gun- 1 × Sword- 1 × Fire Effect part (special bonus for metallic version).
Other FIgures includes in the photos are only for comparison and not included in this toy set. The toy doesn't includes battery for the light effect.
Status:
2023-12 Last set in stock.
Parameters:
Producer
Gigapower (GP)
Size
Robot Form Approx. 26cm (10.5 Inches) Tall
Material
ABS + Alloy / Diecast parts
Shipment
From China
Note
Maybe the best G1 dinobot ever.
Unique Toys UT M01-05 Ragnaros (Bruticus, Combaticons ) Full set of 5 Figures 45cm / 18"
Sold Out
Features:
This UT Ragnaros (in homage to G1 Bruticus, combiner of the members of the Combaticons).
Unique Toys Ragnaros features a unique and classic way in its designs of combination. No accessories are needed to form the main body of the combiner. Have fun with UT's unique design in combination and transformation of the figures.
Buy individual members here:
UT Ragnaros Combiner (Bruticus)
Status:
2019 - 7 In stock
Parameters:
Producer
Unique Toys (UT)
Size
Combiner mode 45cm tall (head to toe).
Material
ABS Plastic
Shipment
From China
Note
Includes all the 5 members that form Ragnaros
Unique Toys UT M05 M-05 Ragnaros Winterchill (Bruticus, Combaticons, Vortex ) 19cm / 7.5"
Sold Out
Features:
This UT M05 Ragnaros as the left arm of the Ragnaros (in homage to G1 Vortex, member of the Combaticons and combines with the members into the mighty Bruticus), transforms into an armed Helicopter in its disguise mode.
Unique Toys Ragnaros features a unique and classic way in its designs of combination. No accessories are needed to form the main body of the combiner. Have fun with UT's unique design in combination and transformation of the figures.
Buy other members and the full 5 sets here:
UT Ragnaros Combiner (Bruticus)
Status:
2019 - 7 In stock
Parameters:
Producer
Unique Toys (UT)
Size
Robot Form Approx. 19 cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Main body of the Ragnaros in combiner mode
Unique Toys UT M04 M-04 Ragnaros Broodlord (Bruticus, Combaticons, Blast off ) 19cm / 7.5"
Sold Out
Features:
This UT M03 Broodlord, as the right arm of the Ragnaros (in homage to G1 Blast off, member of the Combaticons and combines with the members into the mighty Bruticus), transforms into an military conveyor in its disguise mode.
Unique Toys Ragnaros features a unique and classic way in its designs of combination. No accessories are needed to form the main body of the combiner. Have fun with UT's unique design in combination and transformation of the figures.
Buy other members and the full 5 sets here:
UT Ragnaros Combiner (Bruticus)
Status:
2019 - 7 In stock
Parameters:
Producer
Unique Toys (UT)
Size
Robot Form Approx. 19 cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Main body of the Ragnaros in combiner mode
Unique Toys UT M03 M-03 Ragnaros Kalecgo (Bruticus, Combaticons, Onslaught ) 23cm / 9"
Sold Out
Features:
This UT M03 Kalecgo, as the main body of the Ragnaros (in homage to G1 Onslaught, member of the Combaticons and combines with the members into the mighty Bruticus), transforms into an armed truck in its disguise mode.
Unique Toys Ragnaros features a unique and classic way in its designs of combination. No accessories are needed to form the main body of the combiner. Have fun with UT's unique design in combination and transformation of the figures.
Buy other members and the full 5 sets here:
UT Ragnaros Combiner (Bruticus)
Status:
2019 - 7 In stock
Parameters:
Producer
Unique Toys (UT)
Size
Robot Form Approx. 23 cm (9 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Main body of the Ragnaros in combiner mode
Unique Toys UT M02 M-02 Ragnaros Gahz Ranka (Bruticus, Combaticons, Swindle )19cm / 7.5"
Sold Out
Features:
This UT M02 Gahz Ranka, as the left leg of the Ragnaros (in homage to G1 Swindle, member of the Combaticons and combines with the members into the mighty Bruticus), transforms into an armed jeep in its disguise mode.
Unique Toys Ragnaros features a unique and classic way in its designs of combination. No accessories are needed to form the main body of the combiner. Have fun with UT's unique design in combination and transformation of the figures.
Buy other members and the full 5 sets here:
UT Ragnaros Combiner (Bruticus)
Status:
2019 - 7 In stock
Parameters:
Producer
Unique Toys (UT)
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Left leg of the Ragnaros in combiner mode
Unique Toys UT M01 M-01 Ragnaros Archimonde (Bruticus, Combaticons, Brawl )19cm / 7.5"
Sold Out
Features:
This UT M01 Archimonde, as the right leg of the Ragnaros (in homage to G1 Brawl, member of the Combaticons and combines with the members into the mighty Bruticus), transforms into a heavily armored tank in its disguise mode.
Unique Toys Ragnaros features a unique and classic way in its designs of combination. No accessories are needed to form the main body of the combiner. Have fun with UT's unique design in combination and transformation of the figures.
Status:
2019 - 7 In stock
Parameters:
Producer
Unique Toys (UT)
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Right leg of the Ragnaros in combiner mode
MakeToys MT MTRM-11 MTRM11 Howling Meteor (Starscream) 25cm
Sold Out
Features:
MTRM11 Meteor is the latest figure in their Remastered Series by MakeToys (Famous 3rd party transformers Studio.) Similar size to classic MP11 (Buy a 4th party version here.), with better movability and more comic painting which makes the figure looks closer to the image in G1 animation.
Whole set includes:
1 × Toy Figure2 × Laser guns
Parameters:
Producer
MT / MakeToys
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP size
MakeToys MT MTRM-09 MTRM09 Downbeat (Jazz) 18cm
Sold Out
Features:
MTRM-09 Downbeat (Jazz), brought by MakeToys (Famous 3rd party Transformers Studio), is an unprecedented MP size of Jazz before the official version to be released.
Whole set includes accessories as below:- 1 × Shoulder cannon- 1 × Blaster- 2 × Alternate faces- 1 × Grappling hook- 2 × Megaphones
You can also buy another version here TR-01 Hover (Jazz) (Cheaper but decent version).
Status Update:
2019-2 Reissue batch in stock
Parameters:
Producer
MT / MakeToys
Size
Robot Form Approx. 18cm (7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
A fantastic work before the issue of official MP Jazz