Magic Square MS-Toys MS-01X+ MS01X+ Light of Freedom ( Optimus Prime) MP Size Metallic Version Reissue 24cm
Sold Out
Features: *Note: This is the MS-01X+ version with metallic finishing. According to MS Toys, there would be no more spare parts available for this figure. This MS-01 Optimus Prime is the metallic version of MS-01 by Magic Square (MS-Toys, a relatively new 3rd party transformer studio focusing on pocket size toys) in MP Size transformers, with features as follows: - Matt finish paint is applied to the whole body, with texture very close to the coming official MP-44 Optimus Prime. - Different electroplated parts, transparent parts are used to enhance the details. - The Matrix of Leadership is made of diecast. - The whole figure with its unique texture gives an advanced presentation of the classic G1 optimus prime, quite different from other G1 MP-sized OPs issued before. - See the difference between MS-01X Metallic Version on the right and the MS-01 Original version on the left. Status 2022-2 Reissued batch in...
Eagle EG01J EG-01J Not MP52+ MP-52+ (Upgraded Version Thundercracker) 25cm / 10"
Sold Out
Features: Note: 1. Currently there's no spare parts available for this figure. 2. This is is a 1:1 KO version of MP52+ (in homage to MP2.0 Thundercracker) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros: - No simplification in structure and transformation. 1:1 full version KO. - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one. - Some joints are too tight to transform. Status: 2022-2 New batch in stock. Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic +...
Eagle EG01 EG-01 Not MP52 MP-52 (Upgraded Version Starscream) 25cm / 10"
Sold Out
Features:
Note: No Post-sale service (spare part) is available for this figure.
The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China:
Pros:
- No simplification in structure and transformation. 1:1 full version KO.
- Some easily crackable parts of the original figure are changed to nylon ones
- All accessories (replacement parts, special effect parts, stand platforms.) are included.
- Painting are similar to the original figure
Cons
- Still some seams can be found and hard to adjust on the plane mode;
- Details on the head sculpts are not as good as the original one.
- Some joints are too tight to transform.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Eagle
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
Transcraft TC TC-02R T02R Red Jump (Bumblebee Movie Cliffjumper) 17cm / 6.7"
Sold Out
Features:
*Note: This is the red painting version (Cliffjumper version) of TC02 with a new headsculpt and a bit of revision on the model.
TransCraft is a brand-new studio, here comes the new TC02 Beettle (in homage to the bumblebee in bumblebee movie) after their successs in MXG-01. The robot is with matte-painting (similar to the painting in the movie) and it transforms into a vintage Volksvagen Bumblebee.
This set is considered in a lot of the reviews as the best Bumblebee movie bumblebee toy figure ever with its creative design in its transformation and body structure.
Status:
2022-3 New batch in stock.
Parameters:
Producer
TransCraft (TC)
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
APC Toys APC-004BF APC004BF Bossy Flame ( 1:1 TFP Galvatron Voyage Class ) 20cm / 8"
$39.99
$52.99
Features:
*Note: APC-004BF Bossy Flame is a repainted version of APC004 Dark Master with a brand new headsculpt.
Brought by APC Toys (A new 4th / 3rd party studio), this Dark Master is made after the model of official TFP Optimus Prime, with new painting and more weapons, as well as some modification on the original models as below:
- Now the feet of the Dark master can be fully grounded
- The chest and head sculpt of the figure have been modified to fit better to the image of Megatron in the TFC animations.
- All joints have been upgraded
- Matte silver painting.
Status:
2022-3 In stock
Parameters:
Producer
APC Toys
Size
20cm / 8"
Material
Plastic
Shipment
From China
Note
1:1 TFP Megatron (Voyage Class)
No Brand NB 4th Party KO MP49 MP-49 Black Convoy (Nemesis Prime) Neutral Packing Version 25cm / 10"
Sold Out
Features: This is is a 4th party KO version of MP49 Black Convoy (Black OP 3.0) No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected. The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros: - No simplification in structure and transformation. 1:1 full version KO. - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced. - Light effect added to the jet pack. Cons - Plastic material used are not as good as the official version. - Still the hip joints are loose on some sets (same to official version) - On some figures, Some parts don't fit precisely,seams can be found on robot mode. (like inner parts of the...
Iron Factory IF EX-55 EX55 Surfing Arrow(Seaspray)10cm / 4"
Sold Out
Features:
This EX-55 Surfing Arrow (in homage to IDW Seaspray) by Iron Factory(Famous 3rd party transformers studio focusing on legends size toys) is a transformable robot figure which can transform into an armed hovermarine.
Status:
2022-3 In stock.
Parameters:
Producer
Iron Factory (IF)
Size
Robot form 10cm / 4"
Material
ABS
Shipment
From China
Note
IDW
Big Fire Bird Toy EX-01 Plus EX01Plus EX01P Mooka Mocha (Arcee) 19cm / 7.5"
Sold Out
Features:
*Note: This would be a repainted black version for EX01 Nicee with new painting as well as newly added weapons, extra headsculpts as well as other accessories.
Well guys, probably this is the most sexy Arcee-like robot ever, brought by a new studio Big Fire Bird Toy.
This toy features:
- Totally originally designed - Soft texture on cerain part of the body. - two head sculpts (including classic head Arcee-like head sculpt) -extremely magnificent design of body figure (more female like).
Status:
2022-3 In stock.
Parameters:
Producer
Big Fire Bird Toy
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS + Alloy / Diecast parts
Shipment
From China
Note
N/A
Dr.Wu & Mechanic Studio Extreme Warfare DW-E15 Dark Sky (Skywarp) / DW-E16 Sound Master (Blaster) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
Sold Out
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Dr.Wu & Mechanic Studio Extreme Warfare DW-E12 Blue Thunder (Thundercracker) / DW-E13 Sky Glider (Powerglide) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
Sold Out
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Dr.Wu & Mechanic Studio Extreme Warfare DW-E09 Spray Drift (Seaspray) / DW-E10 Star Fear (Starscream) Legends Class (Core Class) fit to Earthrise Titan Class 2 in 1 set 6cm / 4.6"
Sold Out
Features:
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Arch, Metroplex, Ark, Scorponok) and etc.
Both of the two figures are tiny (about half as tall as a coke tin) but transformable and with inpressive details.
More figures are coming in this line according to our current knowledge.
Status:
2022-4 In stock.
Parameters:
Producer
Dr.Wu Studio
Size
N/A
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Flame Toys Furai Model 20 IDW Windblade Model Kit (Non-transformable) 15.5cm / 6"
Sold Out
Features:
*Note: This is non-transformable building kit and you need to assemble it by yourself (it comes with pieces only.)
- Extremely poseable once complete;
- Features more than 50 moveable joints;
- Modern and Shape optimized figure in homage to the image of Windblade (female autobot) in the IDW comics;
Status:
2022-2 In stock.
Parameters:
Producer
Flame Toys
Size
Robot Form Approx. 15.5cm (6 Inches) Tall
Material
ABS
Shipment
From China
Note
Non-transformable, highly articulated figure.
Mechfanstoys MFT MF54 MF-54 Microscope (Perceptor) Mech Fans Toys 10.5 cm / 4.1"
$29.99
$34.99
Features:
This MF-54 Microscope is the latest legends class figure made by MechFansToys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It is a triple changer and transforms into a laser microscope / tank, in homage to G1 Perceptor.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
AlienAttack Toys AAT-01 AAT01 Mackron(Not Bayverse DOTM Megatron Oil Tank)33cm / 13"
Sold Out
Features:
This AAT01 Mackron, in homage to Bayverse DOTM Megatron from the Bayverse Transformer movie is originally designed by AlienAttack Toys (a New 3rd party Studio).
This figure features:
- Robot height 32-33cm, with a weathered paint look.
- The oil tank of the disguise mode is fully built into the robot mode.
- LED light for the eyes (3 x LR521 buttons are needed)
- LED light for the truck head (2 x LR521 buttons for each head light)
- The main figure comes with a shot gun, a weathered cloak, a chain, and the igor mini figure.
Status:
2022-2 In stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 33 cm (13 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
Not Bayverse Crowbar
Mastermind Creations MMC Ocular Max OM PS-21 PS21 Medicus ( First Aid, Defensor ) All-Built-in 17cm / 6.7"
Sold Out
Features:
In homage to G1 First Aid, This MMC Ocular Max OM PS-21 Medicus, transforms into an ambulance and the left arm of the mighty combiner.
This NOT Defensor might be another combiner which needs no accessories in its combination process (All accessories are built-in)
Status:
2022-2 In stock (first batch).
Parameters:
Producer
MasterMind Creations (MMC)
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS
Shipment
From China
Note
MP sized, Combiner w/o accessories.
FansHobby FH MB-17 MB17 Meg-Tyranno (Armada Megatron) Master Build 29.5cm
Sold Out
Features:
*Note: Some robot figures in the product photos are for display only, not included in the set.
This MB-17 figure in homage to the classic image of Megatron (Armada) in the Unicron Trilogy line is brought by Fanshobby (Famous 3rd party transformer studio)
According to current information, this figure features as below:
- It transforms into a heavily armed tank.
- The disguise mode is designed with several cabins and extendable deck which allows it to interact with the robot pilot that would come together with the figure, as well as other legends class figures.
- The robot pilot itself can transform into an armed Jeep.
- The turret is rotatable, main cannon lightable and fireable (manually)
- The tank mode is equipped with real rubber tracks.
Status:
2022-2 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Mode 29.5cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Zeta Toys ZC-05 ZC05 Catapult (Slingshot, Superion) 10cm / 4“
Sold Out
Features:
This ZC-05 Catapult , by ZETA Toys in homage to the Slingshot (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status:
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
Zeta Toys ZC-04 ZC04 Fly Fire (Fireflight, Superion) 10cm / 4“
Sold Out
Features:
This ZC-04 Fly Fire , by ZETA Toys in homage to the Fireflight (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status:
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
Zeta Toys ZC-03 ZC03 Silver Arrow (Silverbolt, Superion) 10cm / 4“
Sold Out
Features:
This ZC-03 Silver Arrow , by ZETA Toys in homage to the Silverbolt (member of the aerialbots), is a legend class robot figure transforming into a Jet Fighter. It can also combine with other 4 robot members of Sky Terror into the most giant combiner Kranos (in homage to G1 Superion).
The combiner is about 23cm-24cm tall, perfectly compatible with the MS-Toys Menasor / Devastator, as well as the Newage Devastator.
Status:
2022-2 In stock
Parameters:
Producer
Zeta Toys
Size
Robot Form Approx. 10cm Tall, Combiner mode 23cm-24cm tall
Material
ABS Plastic
Shipment
From China
Note
Pocket size combiner.
JB Jinbao Pocket Size DF06 (2.0 Version, FG01, FG02, FG03) Aircraft Battlers (Deluxe Seekers: Starscream, Skywarp, Thunderstorm, Oversized Newage Lucifer ) 12cm
$39.99
$49.99
Features: *Note: We offer 2 buy options (1 in original box and the other without the box) in this product link. Pls make sure you choose the right option. This Jinbao DF06 Aircraft Battlers are oversized KO versions of Newage Seekers by New Age, in homage to G1 Starscream, Skywarp and Thunder, It is a 3 in 1 set. The new 2.0 version features: - 12cm tall fitting to all pocket size figures in the market. - Nylon applied to the hip joints, the fragile chest connectors are also improved. - The wing flap parts are added to the jet mode. - The design of the jet mode are also slightly modified. - The whole set comes with 3 x plastic stands, 3 x fire effect sets, 3 x pairs of changeable hands. Status: 2022-2 New batch in stock. Parameters: Producer Jinbao (JB) Size 12cm Material ABS Shipment From China Note KO...
Transformers Generations Selects Micromaster WFC-GS10 Soundwave Spy Patrol 4 in 1 set
Sold Out
Features:
*Note:
(1) No post-sale service can be offered for official line products.
(2) We would try to pack well, however for this set we can't guarantee perfect box. TFSAFARI wont be responsible for box defects for this set. If you order this set you would be considered to accept this proposal from us.
We have got a few sets in stock with favorable price.This set is considered as an upgrade kit.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Takara Tommy
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Not KO
NA NewAge H27EX H-27EX David (Optimus Prime) w/ Convoy Limited Metallic Version New Age 11cm / 4.3"
Sold Out
Features:
*Note: This is a limited version of Newage H27 David with metallic painting and a new face sculpt for H9 Agamemnon.
This NA H27 David would be a new legends class figure ( in homage to G1 Optimus Prime ), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Transparent truck windows
- Soft latex antellas (of the head), and pipes
- Die-cast parts and Matrix of Leadership
- High articulation (3-piece hip and waist joint, separated feet and heels)
- Openable truck door under vehicle mode.
The whole set includes:
1 x David main figure
1 x Energon Axe
1 x Ion Blaster
2 x Changeable hands
1 x Convoy
1 x Roller
Status:
2022-2 New batch in stock.
Parameters:
Producer
NewAge (NA)
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
JB Jinbao Pocket Size BW JB01 JB-01 Beast War Optimal Optimus (KO Iron Factory EX43 Primal Commander) 15cm / 6"
Sold Out
Features:
This Jinbao JB-01 Optimus Primal is a KO versions of Primal Commander by Iron Factory, in homage to Optimal Optimus, the quadruple leader in the BW. with some more weapons and small modifications (not confirmed.)
Status:
2022-1 In stock.
Parameters:
Producer
Jinbao (JB)
Size
15cm / 6“
Material
ABS
Shipment
From China
Note
KO versions of 3rd party transformers.
Iron Factory IF EX-41 EX41 Sonicwave (Soundwave) IronFactory 10cm / 4"
Sold Out
Features:
This EX-41 Sonicwave (in homage to Soundwave) by Iron Factory(Famous 3rd party transformers studio focusing on legends size toys) transforms into two disguise mode (tape recorder and cybertronian truck).
The figure is said to be not with any tape warriors. Two tape warriors would be released in a separate pack later.
Status:
2022-1 In stock.
Parameters:
Producer
Iron Factory (IF)
Size
Robot Form Approx. 11cm (4 Inches) Tall
Material
ABS
Shipment
From China
Note
Two disguise forms are unusual to soundwave.
Generation Toy GT GT-08E GT08E Foo Fighter Inferno (Hot Spot, Defensor, Guardian Robot) 25cm / 10“
Sold Out
Features:
This GT-08E Foo Fighter, another masterpiece by Generation Toy (3rd party transformer producer), transforms into an fire engine and the main body of the GT Guardian. The figure features die-cast parts, rubber tyres, and transparent windows.
Status:
2022-1 In stock.
Parameters:
Producer
Generation Toy (GT)
Size
Robot Form Approx. 25cm (10 Inches) Tall, Combiner height 38cm
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Inspired by IDW Comic
Deformation Space DS-01S DS01S Crimson Wings Purple Version (Skywarp, Seekers G1) 25cm / 10"
Sold Out
Features:
*Note: This is the purple version in homage to Skywarp.
This DS01 by Deformation Space (A new 3rd party Transformers Toys Studio) would be a robot figure following the MP2.0 concept in homage to G1 Starscream. It changes into a F-16 jet fighter, while other details are still unknown yet.
Transformation Video for DS01:
Status:
2022-1 In stock.
Parameters:
Producer
Deformation Space
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
APC Toys APC-007 APC007 Galaxy Mob ( 1:1 TFP Vehicon Deluxe Class )
$33.99
$38.99
Features:
Brought by APC Toys (A new 4th / 3rd party studio), this APC007 Galaxy Mob is designed following the model of official TFP Vehicon with improved details and painting, and is a little bit oversized.
Status:
2022-2 In stock.
Parameters:
Producer
APC Toys
Size
13cm / 5"
Material
Plastic
Shipment
From China
Note
1:1 TFP Soundwave
FansToys FT-47 FT47 Rig (Not G1 Huffer MP) Fans Toys 16cm / 6.30"
$119.99
Features:
Another masterpiece by Fanstoys, in homage to G1 Huffer. It transforms into a yellow trailer.
Status:
2024-9 in stock.
Parameters:
Producer
Fanstoys (FT)
Size
16cm / 6.30"
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MP size Huffer
Magic Square MS-Toys MS-B09X MS B-09X Trailblazer (Trailbreaker) Reissue 11cm / 4.3"
Sold Out
Features:
*Note: Currently what we have is the so-called reissue version with improved painting.
This MS-B09 Trailblazer is a legends class figure made by Magic Square (MS-Toys, a relatively new 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It transforms into a black pickup and back, in homage to G1 Trailbreaker.
Status:
2022-1 Reissue batch in stock
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Trailbreaker
Magic Square MS-Toys MS-B33 MS B-33 Deadly (Perceptor) 11 cm / 4.3"
$34.99
$54.99
Features:
This MS-B33 Deadly is the latest legends class figure made by Magic Square (MS-Toys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It transforms into a laser microscope, in homage to G1 Perceptor.
Status:
2022-10 Reissue batch in stock
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
4th Party BMB BS-03 BS03 KO UT R02 R-02 Challenger (AOE / TLK Optimus Prime) 28cm / 11"
$92.99
$119.99
Features:
*Note:
(1) Current stock comes with the with new metal shoulder joints which is pre-installed or as replacement which is stronger and more durable.
(2) Batteries might be removed for convenience in the shipment.
Battery Type: 5 x LR41 (For LED Eyes & Blaster)
This is the KO version of UT R02 Challenger with some modification and improvements. It is probably done by BMB. The size would be the same as the UT R02 Challenger (Optimus Prime) .
Status Update:
2024-6 Reissue batch in stock.
Parameters:
Producer
4th Party, Black Mamba
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS + Diecast / Alloy parts
Shipment
From China
Note
Bayverse TLK Optimus Prime
DX9 Toys D-06 D06 Carry (Not Hot Rod Rodimus) 24cm
Sold Out
Features:
This D06 Carry (Rodimus Prime) , by DX9 Toys as homage to the offical Rodimus Prime, has received even higher praise among collectors than the classic MP09 (click to buy the latest reissue here). It boasts a unique design that combines the trailer and vehicle together in its transformation into robot form without detaching any parts.
Featuring also the metal feet and rubber tyre, as well as a sniper rifle which can transforme into a legendary robot, this is one of the best Rodimus Prime ever.
Status:
2022-1 In stock.
Parameters:
Producer
DX9 Toys
Size
Robot Form Approx. 24cm (9.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Intergrated Transformation
Moon Studio MS-02 Ice Land, Radiatron (Not G1 Yukikaze, Raiden ) 21cm / 8.3"
Sold Out
Features:
This MS-02 Ice Land, by Moon Studio in homage to the G1 Yukikaze is the 2nd member of the mighty combiner Radiatron (in homage to G1 Raiden, the combiner of the train bots.) It transforms into a high-speed train and one feet of the the combiner.
Status:
2022-1 1st batch in stock.
Parameters:
Producer
Moon Studio (Possible avatar of Zeta Toys )
Size
Height of Robot 21cm / 8.3", Height of the combiner around 55cm
Material
ABS Plastic
Shipment
From China
Note
Combiner member
Moon Studio MS-01 Dark Night, Radiatron (Not G1 Getsuei, Raiden ) 21cm / 8.3"
Sold Out
Features:
This MS-01 Dark Night, by Moon Studio in homage to the G1 Getsuai is the first member of the mighty combiner Radiatron (in homage to G1 Raiden, the combiner of the train bots.) It transforms into a high-speed train and one feet of the the combiner.
Status:
2022-2 In stock.
Parameters:
Producer
Moon Studio (Possible avatar of Zeta Toys )
Size
Height of Robot 21cm / 8.3", Height of the combiner around 55cm
Material
ABS Plastic
Shipment
From China
Note
Combiner member
Dr.Wu & Mechanic Studio Extreme Warfare DW-E04 DWE04 Prime Commander (Optimus Prime) w/ convoy Legends Class (Toy Color Version) 6cm / 4.6"
Sold Out
Features:
*Note: This is the latest toy color version with a blue roller as an extra accesory.
Dr.Wu's new series of core class G1 figures with its size coordinated to the official Titan Class figures (Scorponok) and etc.
This prime commander can transform into a small truck head and it also comes with a convoy wich can be opened in 2 different ways (in accordance with G1 animations)
More figures are coming in this line according to our current knowledge.
Status:
2023-2 Reissue batch In stock.
Parameters:
Producer
Dr.Wu Studio
Size
6cm
Material
Plastic
Shipment
From China
Note
Upgrade Kit
Robot Paradise RP-01B RP01B Ravage, Laserbeak & Rumble Cassette Warriors 3 in 1
Sold Out
Features:
MP size cassette warriors (Ravage, Laserbeak & Rumble) 3 in 1 set fit to the MP size RP-01 Acoustic wave (in homage to G1 classic soundwave).
You can buy the RP-01 set in the below link:
Robot Paradise RP-01 Acoustic Wave (G1 Soundwave)
Status:
2022-1 In stock.
Parameters:
Producer
Robot Paradise ( Probably avatar of Fanstoys (FT))
Size
Fit to RP01
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MP size Soundwave
XTransbots MX-27 MX-XXVII MX27 Janssen ( Perceptor ) X-transbots
Sold Out
Features:
This MX-27 Janssen by Xtransbots (A famous 3rd party transformer studio) would be a new robot figure with its size perfectly matching official MP series (in homage to G1 Perceptor ). It transforms into a microscope.
The whole set may includes:
- 1 x Main figure;
- 5 x Changeable faces;
- 1 x New comic headsculpt;
- 3 x Mini robot figures;
- 1 x Mini telescope figure;
- 1 x Rifle
- 1 x laser pistol
- 1 x Missle launcher
- 1 x Beaker
- 1 x Test tube
- 1 x Fire effect part
Status
2022-1 New batch in stock.
Parameters:
Producer
Xtransbots
Size
Unknown
Material
ABS Plastic, Die-cast
Shipment
From China
Note
MP Size
FansHobby FH MB-14 MB14 Kap (MP Hosehead) Master Build
Sold Out
Features:
This MB-14 Kap, in homage to the classic image of Hosehead is brought by Fanshobby (Famous 3rd party transformer studio)
This set is of vivid painting fitting, and in accordance with the size of official MP line. It transforms into a red fire engine. It also comes with a robot pilot which can fit in to the cabin as the driver.
Status:
2022-1 In stock.
Parameters:
Producer
Fanshobby
Size
Robot Form Approx. 17cm (6 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
NA NewAge H16G H-16G Fenrir (G2 Ramjet ) SGC Limited Version New Age 9cm / 3.5"
Sold Out
Features:
*Note: This is 13th SGC limited version with very limited qty.
This new H16G Fenrir ( Inspired by G2 Ramjet, ), brought by NewAge ( A new 3rd party Transformer studio focusing on pocket size toys) is of legends scale and transforms into 3 jet fighters of different styles.
This figure follows the classic images in G1 cartoon, with amazingly high articulation, vivid head sculpts and baking-like finishing on some parts. The different styles of wings (in G1 cartoon) has also been completely displayed in the design of this set, which is unprecedented among all the legends-class likewise figures in the market.
Its size is compatible with other NewAge legends class figure.
Status:
2021-12 In stock.
Parameters:
Producer
NewAge (NA)
Size
Robot Form Approx. 9cm (3.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
NA NewAge H41 H-41 Jones (Beach Comber) New Age 10cm / 4"
Sold Out
Features:
This NA H41 Jones would be a new legends class figure ( in homage to G1 Beach Comber), brought by NewAge ( A famous 3rd party Transformer studio focusing on pocket size toys)
This figure features:
- Baking paintings
- Die-cast feet
The whole set includes:
1 x Main figure
1 x Laser gun
Status:
2021-12 In stock.
Parameters:
Producer
NewAge (NA)
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Legends class toy
Iron Factory IF EX-45K EX45K Iron Samurai Kage Shishimaru (Lio Convoy / Leo Prime) Nemesis Version 10cm / 4"
Sold Out
Features:
*Note:This would be the black Nemesis version of IF-EX45 Shishimaru. It transforms into a black tiger with evil wings.
This EX-45 Shishimaru (in homage to Lio Convoy) by Iron Factory(Famous 3rd party transformers studio focusing on legends size toys) would be the first figure of its brand-new Iron samurai series. The figure would be equipped with katanas, and transforms into a white tiger.
Status:
2021-12 In stock
Parameters:
Producer
Iron Factory (IF)
Size
Robot Form Approx. 10cm (4 Inches) Tall
Material
ABS
Shipment
From China
Note
Iron Samurai
Iron Factory IF EX-39D EX39D Dustfog ( Exhaust) SGC Convention Exclusive IronFactory 9cm / 3.5"
Sold Out
Features:
IF EX-39D Dustfog is a legendary-sized figure in homage to Exhaust by Iron Factory (Famous 3rd party transformers studio focusing on legends size toys)It transforms into classic race car.
The robot is small but with no simplification in its painting, movability and fun in the process of transformation.
This is an SGC Convention exclusive version with very limited qty.
Status:
2021-12 In stock
Parameters:
Producer
Iron Factory (IF)
Size
Robot Form Approx. 9cm (3.5 Inches) Tall
Material
ABS
Shipment
From China
Note
Legendary sized presentation of IDW Dustfog
JB Jinbao Pocket Size DF08 DF-08 8871B Freeze Devil (Transmetal Megatron Blue Version ) 15cm / 6"
Sold Out
Features:
This Jinbao DF08 Flame Devil is an minimized KO versions of Blue Dragon by Perfect Effect, in homage to Transmetal 2 Megatron. with some more weapons and small modifications (not confirmed.)
Status:
2022-7 New batch in stock.
Parameters:
Producer
Jinbao (JB)
Size
15cm / 6“
Material
ABS
Shipment
From China
Note
KO versions of 3rd party transformers.
Cyber Era CE01 CE-01 Beetle (Bumblebee Movie Bumblebee, Oversized OS Transcraft TC02) Reissue 20cm / 8.1"
$79.99
$89.99
Features:
This is an oversized version of the below figure (in homage to the image of Bumblebee Move Bumblebee).
Transcraft TC02 Beetle (Bumblebee movie Bomblebee)
This new version features:
- 2 x headsculpts with LED eye lights
- 2 x arm blades
- 1 x war hammer (only with the 1st batch)
Status:
2024-9 Reissued New batch in stock.
Parameters:
Producer
Cyber Era
Size
Robot Form Approx. 17cm (6.7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
Deformation Space DS-01R DS01R Crimson Wings Blue Version (Thundercracker, Starscream G1) 25cm / 10"
Sold Out
Features:
*Note: This is the blue version in homage to Thundercracker.
This DS01 by Deformation Space (A new 3rd party Transformers Toys Studio) would be a robot figure following the MP2.0 concept in homage to G1 Starscream. It changes into a F-16 jet fighter, while other details are still unknown yet.
Transformation Video for DS01:
Status:
2021-12 In stock.
Parameters:
Producer
Deformation Space
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
MP Size
Magic Square MS Toys Constructor Devastator Combiner 3 sets (2 in 1 set) 25cm / 9.85"
Sold Out
Features: *Note: This link is for pre-order of all 3 sets of the combiner (which might be released separately). The MS Toys Constructor or Devastator Combiner (Formal name not confirmed yet) include 3 x 2 in 1 sets as below, in homage to G1 Devastator. MS-B37 Shovel Master & MS-B38 Roller Master MS-B41 Excavator & MS -B42 Bulldozer MS -B30 Hook & MS -B40 Long Haul Each set is said to include certain parts of the accessories needed for the final combination, and you get all the 3 sets you get all you need for the final combiner (no need to buy more accessories). All the accessories combines into the main body of the combiner (see photo) as well as a double-driller in the team mode. Status: 2021-12 In stock. Parameters: Producer Magic Square (MS-Toys) Size Combiner form 25cm / 9.85" Material ABS Plastic Shipment From China Note Legendary-sized Constructor ...
Magic Square MS Toys MS-B39 Hook & MS-B40 Long Haul Constructor Devastator Combiner Set B (2 in 1 set)10cm / 4"
Sold Out
Features: *Note: This link is for Set C (2 in 1 set of MS-B39 Hook and MS-B40 Long Haul, as well as the last part of the accessories needed for the combiner). The MS Toys Constructor or Devastator Combiner (Formal name not confirmed yet) include 3 x 2 in 1 sets as below, in homage to G1 Devastator MS-B37 Shovel Master & MS-B38 Roller Master MS-B41 Excavator & MS -B42 Bulldozer MS -B30 Hook & MS -B40 Long Haul Each set is said to include certain parts of the accessories needed for the final combination, and you get all the 3 sets you get all you need for the final combiner (no need to buy more accessories). All the accessories combines into the main body of the combiner (see photo) as well as a double-driller in the team mode. Status: 2021-12 In stock. Parameters: Producer Magic Square (MS-Toys) Size Combiner form 25cm...
Titan Power TP-01 TP01 Titan Beast King (Voltron) Non-Transformable Metallic Version 30cm / 12"
Sold Out
Features:
Titan Beast King Metallic Version features:
- Non-transformable / Disassemblable
- Brand-new mettalic finishing
- Various weapons
- The lights are all CANCELLED for this version (mainly eyelights for the eyes.)
Status:
2021-12 A few sets in stock.
Parameters:
Producer
Titan Power
Size
30cm tall
Material
ABS Plastic + Die cast part
Shipment
From China
Note
Non-transformable Voltron
TFC Toys STC-02 STC02 Tyrant (Dominant Megatron) 24cm / 9.5"
Sold Out
Features:
STC-02 Tyrant is designed following the classic image of Dominant Megatron by TFC TOYS. It is a triple changer which can transform from heavily armed robot into a tank (with 2 battle modes) and a helicopter.
This figure features disassemblable armors, 3 different faces and more than 6 different modes (a lot more).
Status
2021-12 New batch in stock.
Parameters:
Producer
TFC TOYS
Size
Armored Robot Form Approx. 29cm (11.5 Inches) Tall, Unarmored figure approx. 24cm (9.5 Inches) Tall.
Material
PVC, Diecast / Alloy Part
Shipment
From China
Note
Dominant Megatron
AOYI Mech LS-13Z LS13Z Tactical Commander (Oversized SS38 Optimus Prime, Shattered Glass Version) 30cm / 12"
Sold Out
Features:
*Note: A Shattered Glass (Purple) Version of LS13 Tactical Commander
A new oversized OP figure in homage to the official SS38 Optimus Prime (from the Bumblebee Movie)is brought by a new 3rd / 4th party transformer studio AOYI mech (should be the sub-brand of Black Mamba BMB) .
This new OP with enhanced details and much bigger size is also equipped with LED lights in its head / eyes of robot, and high quality rubber tyre. The original mould of SS38 has also been modified.
Status:
2020-12 A few sets in stock on sale.
Parameters:
Producer
AOYI Mech, Sub-brand of Black Mamba (BMB)
Size
Robot Form Approx. 30cm (12 Inches) Tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
Oversized version of Official SS38 Optimus Prime