
BPF Commander (OS Oversized WFC Siege OP) 20 cm / 8"
$29.99
Features:
Oversized WFC Siege OP with improved painting, and die-cast parts added
Status:
2022-4 New batch in stock.
Parameters:
Producer
BPF
Size
Oversized WFC Siege OP
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
N/A
Mechfanstoys MFT MF53 MF-53 Trailer (Hoist) Mech Fans Toys 10.5 cm / 4.1"
$26.99
$32.99
Features:
This MF-53 Trailer is the latest legends class figure made by MechFansToys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It comes with a lot of accessories and transforms into a pick-up truck, in homage to G1 Hoist.
Status:
2022-4 New batch in stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
【Loose Pack】4th Party TFP Commander Class NOT Optimus Prime / Megatron / Ultra Magnus / Bulkhead / Ironhide 10cm / 4"
$19.99
$24.99
Features:
1. These should be 1:1 KO products and would be shipped WITHOUT the origional box.
2. Comparing to the original version there might be some minor defects as below:
(1) Some joints might be loose and you need to strengthen them by yourself.
(2) The coating on some parts are a little bit overflowed.
Status:
2022-3 In stock.
Parameters:
Producer
4th Party
Size
10cm / 4"
Material
Plastic
Shipment
From China
Note
1:1 KO
Eagle EG01N EG-01N Not MP52+ MP-52+ (Skywarp Upgraded Version ) 25cm / 10"
$69.99
$84.99
Features: Note: 1. There's no spare part available for this figure. 2. This is is a 1:1 KO version of MP52+ (in homage to MP2.0 Skywarp) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros: - No simplification in structure and transformation. 1:1 full version KO. - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one. - Some joints are too tight to transform. Status: 2022-3 New batch in stock. Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic + Diecast...
APC Toys APC-007 APC007 Galaxy Mob ( 1:1 TFP Vehicon Deluxe Class ) 2 Sets
$51.99
$55.99
Features:
*Note: This link is for 2 sets sold at a favourable price.
Brought by APC Toys (A new 4th / 3rd party studio), this APC007 Galaxy Mob is designed following the model of official TFP Vehicon with improved details and painting, and is a little bit oversized.
Status:
2025-3 Reissue batch in stock.
Parameters:
Producer
APC Toys
Size
13cm / 5"
Material
Plastic
Shipment
From China
Note
1:1 TFP Soundwave
Eagle EG01J EG-01J Not MP52+ MP-52+ (Upgraded Version Thundercracker) 25cm / 10"
$69.99
$84.99
Features: Note: 1. Currently there's no spare parts available for this figure. 2. This is is a 1:1 KO version of MP52+ (in homage to MP2.0 Thundercracker) with some improvement. The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China: Pros: - No simplification in structure and transformation. 1:1 full version KO. - Some easily crackable parts of the original figure are changed to nylon ones - All accessories (replacement parts, special effect parts, stand platforms.) are included. - Painting are similar to the original figure Cons - Still some seams can be found and hard to adjust on the plane mode; - Details on the head sculpts are not as good as the original one. - Some joints are too tight to transform. Status: 2022-2 New batch in stock. Parameters: Producer Eagle Size Robot Form Approx. 25cm (10 Inches) Tall Material ABS Plastic +...
Eagle EG01 EG-01 Not MP52 MP-52 (Upgraded Version Starscream) 25cm / 10"
$89.99
Features:
Note: No Post-sale service (spare part) is available for this figure.
The below are pros and cons of this EG01 set based on the feedback from our domestic customers in China:
Pros:
- No simplification in structure and transformation. 1:1 full version KO.
- Some easily crackable parts of the original figure are changed to nylon ones
- All accessories (replacement parts, special effect parts, stand platforms.) are included.
- Painting are similar to the original figure
Cons
- Still some seams can be found and hard to adjust on the plane mode;
- Details on the head sculpts are not as good as the original one.
- Some joints are too tight to transform.
Status:
2022-2 New batch in stock.
Parameters:
Producer
Eagle
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
APC Toys APC-004BF APC004BF Bossy Flame ( 1:1 TFP Galvatron Voyage Class ) 20cm / 8"
$39.99
$52.99
Features:
*Note: APC-004BF Bossy Flame is a repainted version of APC004 Dark Master with a brand new headsculpt.
Brought by APC Toys (A new 4th / 3rd party studio), this Dark Master is made after the model of official TFP Optimus Prime, with new painting and more weapons, as well as some modification on the original models as below:
- Now the feet of the Dark master can be fully grounded
- The chest and head sculpt of the figure have been modified to fit better to the image of Megatron in the TFC animations.
- All joints have been upgraded
- Matte silver painting.
Status:
2022-3 In stock
Parameters:
Producer
APC Toys
Size
20cm / 8"
Material
Plastic
Shipment
From China
Note
1:1 TFP Megatron (Voyage Class)
No Brand NB 4th Party KO MP49 MP-49 Black Convoy (Nemesis Prime) Neutral Packing Version 25cm / 10"
$99.99
$124.99
Features: This is is a 4th party KO version of MP49 Black Convoy (Black OP 3.0) No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected. The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros: - No simplification in structure and transformation. 1:1 full version KO. - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced. - Light effect added to the jet pack. Cons - Plastic material used are not as good as the official version. - Still the hip joints are loose on some sets (same to official version) - On some figures, Some parts don't fit precisely,seams can be found on robot mode. (like inner parts of the...
Mechfanstoys MFT MF54 MF-54 Microscope (Perceptor) Mech Fans Toys 10.5 cm / 4.1"
$29.99
$34.99
Features:
This MF-54 Microscope is the latest legends class figure made by MechFansToys, a famous 3rd party transformer studio focusing on pocket size toys), with excellent movability and details.
It is a triple changer and transforms into a laser microscope / tank, in homage to G1 Perceptor.
Status:
2023-2 New batch in stock.
Parameters:
Producer
Magic Square (MS-Toys)
Size
Robot Form Approx. 11cm (4.3 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legendary-sized Perceptor
APC Toys APC-007 APC007 Galaxy Mob ( 1:1 TFP Vehicon Deluxe Class )
$27.99
$34.99
Features:
Brought by APC Toys (A new 4th / 3rd party studio), this APC007 Galaxy Mob is designed following the model of official TFP Vehicon with improved details and painting, and is a little bit oversized.
Status:
2024-3 Reissue batch in stock.
Parameters:
Producer
APC Toys
Size
13cm / 5"
Material
Plastic
Shipment
From China
Note
1:1 TFP Soundwave
MFT MechFansToys Lost Planet Diaclone Reboot DA-07 DA07 Cosmos Battle Upgrade Kit for Dia-Battles Mech Fans Toys 7cm / 3"
$44.99
Features:
MechFansToys Lost Planet DA-07 is a 1:1 KO version of Diaclone Reboot DA-07 Dia-Battles brought by MechFansToys / MFT in its latest Lost Planet series. It is an upgrade kit for the below figure (which we also have stock):
MFT MECHFANSTOYS LOST PLANET DIACLONE DA-01 DA01 DIA-BATTLES
Status
2021-11 New batch In stock
Parameters:
Producer
Mecha Fans Toys (MFT)
Size
Upgrade kit fitting to DA01
Material
ABS Plastic
Shipment
From China
Note
N/A
4th Party NB No-Brand Not MP20 MP-20 Wheeljack & Not MP23 MP-23 Exhaust (Non-Official Version)
$29.99
$32.99
Features:
*Note: This product link contains different buy options. Pls make sure you choose the right one you want.
These 2 No-Brand figures are KO versions of the official MP-20 and MP-23. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below:
Pros: No simplification on all the transformation process. Almost no large seams in the vehicle mode (better than most of the KO figures.) Cons: Painting is a little bit thin. The knee joints of some figures may be a little bit loose.The wheels of some figures may not rotate smoothly.
Status:
2021-11 New batch in stock.
Parameters:
Producer
No Brand
Size
MP Size
Material
ABS Plastic
Shipment
From China
Note
KO Version
APC Toys APC-006B APC006B Serpent Bell ( 1:1 TFP Soundwave Deluxe Class ) Black Cobra Version
$39.99
$44.99
Features:
*Note: This is the black version with a brand new painting.
Brought by APC Toys (A new 4th / 3rd party studio), this APC006 Evil Voice is designed following the model of official TFP Soundwave, and is oversized.
Status:
2021-11 In stock.
Parameters:
Producer
APC Toys
Size
Unknown
Material
Plastic
Shipment
From China
Note
1:1 TFP Soundwave
MFT MechFansToys Mechanic Toys Mech Soul MS-21 MS21 Flame Walker (Hot Rod) Mech Fans Toys 10cm / 4"
$32.99
$39.99
Features:
This MS-21 Flame Walker (In homage to G1 Hot Rod in the 1986 Transformer Movies) would be another D-grade figure brought by MechFansToys / MFT in its latest Mech Soul series. It transforms into a cybertronian car.
The whole set includes:
1 x main figure
1 x Hand saw
1 x Rod
2 x Laser guns
1 x Changeable head sculpt
Status
2021-10 In stock.
Parameters:
Producer
Mecha Fans Toys (MFT)
Size
Robot Form height around 10cm / 4"
Material
ABS Plastic
Shipment
From China
Note
In homage to G1 Wreck-Gar
MFT MechFansToys Mechanic Toys Mech Soul MS-29 MS29 Falcon (Springer) Mech Fans Toys 10cm / 4"
$36.99
$44.99
Features:
This MS-29 Falcon (In homage to G1 Springer in the 1986 Transformer Movies) would be another D-grade figure brought by MechFansToys / MFT in its latest Mech Soul series. It transforms into either a helicopter or a cybertronian car.
The whole set includes:
1 x main figure
1 x Sword
1 x Laser gun
1 x Bomb
Status
2021-10 In stock.
Parameters:
Producer
Mecha Fans Toys (MFT)
Size
Robot Form height around 10cm / 4"
Material
ABS Plastic
Shipment
From China
Note
In homage to G1 Wreck-Gar
4th Party No Brand KO MPM05 MPM-05 Barricade
$49.99
$54.99
Features:
This is a 1:1 KO version of the MPM05 Barricade from the official line, with no modification.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2022-5 New batch in stock.
Parameters:
Producer
N/A
Size
Same as official MPM05 Barricade
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
MFT MechFansToys Lost Planet Diaclone Reboot DA-06 DA06 Dia-Battles V2 Cosmo Maneuver Type Mech Fans Toys 7cm / 3"
$74.99
Features:
MechFansToys Lost Planet DA-06 is a 1:1 KO version of Diaclone Reboot DA-06 Dia-Battles V2 Cosmo Maneuver Type brought by MechFansToys / MFT in its latest Lost Planet series. Its disguise modes include 3 different types (all base modes).
Status
2021-10 A few sets in stock.
Parameters:
Producer
Mecha Fans Toys (MFT)
Size
Robot Form Approx. 10cm (4 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
MFT MechFansToys Mech Soul MS-24 MS24 Recyclers (Wreck-Gar) Mech Fans Toys 10cm / 4"
$34.99
$39.99
Features:
This MS-24 Recyclers (In homage to G1 Wreck-Gar in the 1986 Transformer Movies) would be another D-grade figure brought by MechFansToys / MFT in its latest Mech Soul series. It transforms into an motor-cyle, while other details are still unknown.
Status
2023-10 Reissue batch in stock.
Parameters:
Producer
Mecha Fans Toys (MFT)
Size
Robot Form height around 10cm / 4"
Material
ABS Plastic
Shipment
From China
Note
In homage to G1 Wreck-Gar
MFT MechFansToys Lost Planet Diaclone Reboot DA-01 DA01 Dia-Battles Mech Fans Toys 7cm / 3"
$69.99
Features:
MechFansToys Lost Planet DA-01 is a 1:1 KO version of Diaclone Reboot DA-01 Dia-Battles brought by MechFansToys / MFT in its latest Lost Planet series. Its disguise modes include 3 different types (all base modes).
Note*:Some accessories in the product pictures like the Power Suit (was an accessory of the previous batch but NOT with the current one)are for display only and not included in the product figure.
Status
2021-9 New batch In stock
Parameters:
Producer
Mecha Fans Toys (MFT)
Size
Robot Form Approx. 10cm (4 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
No Brand 4th Party JH01 JH-01 KO MPM11 MPM-11 Ratchet Green Version ( Enhanced Details & Painting) 19cm / 7.5"
$79.99
$89.99
在Features:
Note: This is the green color version. You can find the original color version in the below link:
NO BRAND JH01 JH-01 KO MPM11 MPM-11 RATCHET
This is a 1:1 KO version of the MPM11 Ratchet from the official line, with enhanced details on painting.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2021-5 New batch in stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
4th party NB No-Brand MP17 MP-17 Police Car (Not Prowl)
$37.99
Features:
This No-Brand figure is an KO version of the official MP-17. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below:
Pros: No simplification on all the transformation process. Good texture of the plastic used. Decent painting.
Cons: There's some small deviation of the part and seams can be found. In some batches some joints are loose (like the joint for the shoulder cannon. )
Status
2022-9 New batch In stock.
Parameters:
Producer
No Brand
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
KO Version
No Brand 4th Party MP28 MP-28 HR Red Race Car (Not Hot Rod) 19cm / 7.5"
$29.99
$39.99
Features:
This is a KO version of MP-28 from official line. Product photo is real shot. Generally the quality of this KO is decent (painting, joints).
Pros: No simplification on all the transformation process. Almost no large seams in the vehicle mode (better than most of the KO figures.)Relativel good painting. Cons: Plastic used is not as good as the official version.In some batches the joints on the legs are loose.
Status:
2021-9 New batch in stock.
Parameters:
Producer
Takara Tommy
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Factory-released version, Not KO.
4th Party Masterpiece KO BW-10 BW10 MP50(Beast War Tigatron)18cm / 7"
$69.99
$89.99
Features:
This is a 4th party 1:1 KO version of MP50 Tigatron. This robot figure transforms into a white mechanic tiger. Current batch includes the BW Megatron head sculpt.
Status:
2023-9 Reissue batch In stock.
Parameters:
Producer
Toys Mage
Size
Robot Form Approx. 18cm (7 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
KO MP50
4th Party KO MP32 MP-32 General Gorilla (Optimus Primal)
$72.99
$87.99
Features: 1:1 KO version of MP32. All product photos are for this KO version. Pros: (1) Good quality plastic are used for the main body. (2) Most Ratchet joints work well. (3) Quality of Painting are similar to original version (with a deeper color tone.) Cons:(1)For random batches joint of the left leg is loose.(2)For random batches joints for the backpack and hips are tight (lubricant is needed), or the plastic around the joint might crack.(3)On certain parts tiny color difference can be observed (backs of the hands, bellys of the gorilla mode)(4)Burrs (caused by the injection molding) appears on the edges of some parts (changeable faces, back pack and etc.) Note: (1)*No coin. (2) Except for major defects, no post-sales service can be guaranteed. Customers who buy this figure are considered that they accept the pros and cons listed as above. Video Review by 양말TV SocksTV: Status: 2024-10 Reissue batch in stock (4th...
BPF Lieutenant (OS Oversized WFC Siege Ultra Magnus) 23.5cm / 9.5"
$39.99
Features:
Oversized WFC Siege Ultra Magnus with improvement as below:
- Gaps on the original body and weapons are all filled.
- Weapon sockets are compatible with the official WFC Siege line.
- The feet pads and the chest armor are replaced with die-cast parts.
- Good quality plastic is applied, similar to the official UM.
- The official battle-damaged painting is eliminated.
Status:
2021-8 New batch in stock.
Parameters:
Producer
BPF
Size
Oversized WFC Siege Ultra Magnus
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
Quality proved by the market to be reliable
GigaPower GP HQ-04R HQ04R Gravitor (Sludge) Chrome Version 28cm
$209.99
$229.99
Features:
HQ-04R Gravitor (Sludge) is the chrome version reissue of the master piece HQ-04 by GP / Gigapower (famous 3rd party transformer studio focusing on collectible grade transformer action figure).
Most coordinated size with offical MP series toys, with excellent details in design. You will also be surprised by the movability of such a huge dinobot. A must-buy collection for your show case.
Whole set includes: 1 x Red Sword1 x Laser Cannon1 x Changeable Head 7 x Detachable Plastic Visors1 x Blaster Rifle
Other FIgures includes in the photos are only for comparison and not included in this toy set.
Status:
2021-8 Reissue stock coming by Aug 10th-15th. Full Payment acceptable. Shipment would be done once the product comes into stock.
Parameters:
Producer
Gigapower (GP)
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS + Alloy / Diecast parts
Shipment
From China
Note
Maybe the best G1 dinobot ever.
4th Party KO MP29 MP-29 Shockwave 19cm / 7.5"
$49.99
$64.99
Features:
Note:
(1)*No coin.
(2) Except for major defects, no post-sales service can be offered. Customers who buy this figure are considered that they accept the pros and cons listed as below.
KO version of MP29.
Pros: (1) Good quality plastic are used for the main body. (2) Ratchet joints work well.
Cons:(1)For random batches some joints of the lower body are loose.(2)For random batches the trace of the plastic injection gate are obvious on the body of the figure. (3)For random batches some lights may not lit up,this is a common defect for this version and cant be solved by post-sale service.
Status:
2022-3 New batch in stock
Parameters:
Producer
Takara Tommy
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
N/A
APC Toys APC-006 APC006 Evil Voice ( 1:1 TFP Soundwave Deluxe Class )
$59.99
Features:
Brought by APC Toys (A new 4th / 3rd party studio), this APC006 Evil Voice is designed following the model of official TFP Soundwave, and is oversized.
Status:
2021-8 In stock.
Parameters:
Producer
APC Toys
Size
Unknown
Material
Plastic
Shipment
From China
Note
1:1 TFP Soundwave
4th Party NB No-Brand MP39 MP-39 Sunstreaker (Non-Official Version)
$51.99
$64.99
Features:
This No-Brand figure is an KO version of the official MP-39. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below:
Pros: No simplification on all the transformation process. The disguise mode is moveable with its tyres Almost no large seams in the vehicle mode (better than most of the KO figures.) Cons: Plastic used is not as good as the official version. Some parts are not well-polished. Painting is too thin (Peeling occurs occasionally during the tranformation.)
Status
2022-6 New batch in stock.
Parameters:
Producer
No Brand
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
KO Version
4th Party No Brand KO MPM10 MPM-10 F12AS Starscream Cybertronian Painting 28cm / 11"
$64.99
$89.99
Features:
Note: This is the Cybertronian painting version (some of the product photo listed is for the ordinary version with the buying link as below)
Regular version can be found here: Regular version KO MPM10
This is a 1:1 KO version of the MPM10 Starscream from the official line, with modification as below:
- Deep metallic painting is applied (closer to the image in Bayverse movie)
- Back hip parts of the robot mode is modified
- The feet part is also modified.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2021-6 In stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
4th Party No Brand KO MPM10 MPM-10 F01 Starscream 28cm / 11"
$87.99
Features:
This is a 1:1 KO version of the MPM10 Starscream from the official line, with modification as below:
- Deep metallic painting is applied (closer to the image in Bayverse movie)
- Back hip parts of the robot mode is modified
- The feet part is also modified.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2021-6 New batch in stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
4th Party No Brand JH01 JH-01 KO MPM11 MPM-11 Ratchet ( Enhanced Details & Painting) 19cm / 7.5"
$69.99
$89.99
Features:
*Note: Last set in stock. No spare part service is available now for this set.
This is a 1:1 KO version of the MPM11 Ratchet from the official line, with enhanced details on painting.
Status:
2022-12 New batch in stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
4th Party No Brand KO Oversized BS01 BS-01 Dance of Death (AAT STF01 STF-01 Firage, Dino) 19cm / 7.5"
$39.99
$59.99
Features:
This is an oversized KO version of the STF01 Dino by AAT, the producer should be BMB Black Mamba
Status:
2024-7 New batch in stock.
Parameters:
Producer
BMB
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO oversized version
Pocket Toys PL-0 PL0 PT-05 PT05 Ruiner B. 5 in 1 (Bruticus, KO Iron Factory EX-22 EX22 War Giant) 28cm
$45.99
$79.99
Features:
*Note:There're two different buy options in this page. Pls make sure you choose the right one you want.
This PL-0 PL0 Ruiner (Bruticus) by Pocket Toys (3rd party / 4th Party Transformer manufacturer focusing on pocket-size toys) is a 1:1 K.O. version of Iron Factory EX-22 War Giant.
In this KO version, Pocket Toys has inherited almost all the pros of Iron Factory toys (no degrading in painting, joints, plastic, playability and etc.) but only charges for no more than 50% in pricing comparing to the original version. A good choice if you miss the IF EX-22 war giant as no one knows when it would be reissued.
Status:
2022-11 New batch in stock.
Parameters:
Producer
Pocket Toys
Size
Combiner Form Approx. 28cm (11 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Legends class toy, 5 in 1 Combiner
No Brand NB Silver Leg Version 4th Party KO MP44 MP-44 OP 3.0 Loose Pack Version (No box, No manual) 25cm / 10"
$119.99
$124.99
Features: *Note: Now we have the 3rd batch in stock which is with its hips painted in silver, that's why we call it "Silver Legs Version" This is is a 4th party KO version of MP44 OP 3.0. No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected. The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros: - No simplification in structure and transformation. 1:1 full version KO. - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced. - Light effect added to the jet pack. Cons - Plastic material used are not as good as the official version. - Still the hip joints are loose on some sets (same to...
Toysmage TM01 T-Rex KO MP43(Beast War Megatron)25cm / 10"
$97.99
$109.99
Features:
Note: All LED parts are cancelled for the current batch.
This Toymage TM01 T-Rex is an improved version of the official MP43 Megatron, featuring:
- Some loose and easily breakable parts on the original version like waist joints and some snaps on the body have been strengthened.
- Voice chips changes from Japanese to Chinese and English (According to the current feedback, there's possibility for some voice chips to be born defected. Currently TM can't offer replacement )
- The painting and details are done generally similar to the original official version.
- Transparent parts has been re-made.
Status:
2023-12 Reissue version coming very soon in 1-2 weeks.
Parameters:
Producer
Toys Mage
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
Improved KO version of MP43
APC Toys APC-005 APC005 Angel Engine ( 1:1 TFP Arcee Deluxe Class ) 15cm / 6"
$47.99
Features:
Brought by APC Toys (A new 4th / 3rd party studio), this APC005 Angel Engine is designed following the model of official TFP Arcee, it is with new painting and more weapons, as well as some modification on the original models as below:
- Handguards added to the figure (closer to the )
- Now the grips can be hidden under robot mode.
- Headsculpt is re-designed.
- All Dr.Wu upgrade kits included in this set
- Metallic painting.
Status:
2021-2 In stock
Parameters:
Producer
APC Toys
Size
20cm / 8"
Material
Plastic
Shipment
From China
Note
1:1 TFP Megatron (Voyage Class)
Transformers Power of the Primes POTP Predaking 5 in 1 set 【Unofficially Released Version】
$199.99
$239.99
Features:
This POTP Predaking 5 in 1 set (Titan Class combiner) is a genuine version released unofficially from Viet Nam (Hasbro factory), it is not an official version in any market but it is also not KO. We got a few stock with the most favorable price.
Status:
2021-1 A few set in stock.
Parameters:
Producer
Official
Size
Same size as official version.
Material
ABS Plastic
Shipment
From China
Note
N/A
APC Toys APC001 / APC004 Charger & Dark Master ( 1:1 TFP Optimus Prime & Megatron Voyage Class ) 20cm / 8"
$87.99
$94.99
Features:
If you buy these 2 figures together, we offer you special discount . APC004 Dark Master is the ordinary version while APC001 Charger is the 2.0 chrome version.
For details pls check the link of each products as below:
APC Toys Dark Master
APC Toys Charger
Status:
2020-12 In stock.
Parameters:
Producer
APC Toys
Size
20cm / 8"
Material
Plastic
Shipment
From China
Note
1:1 TFP Megatron (Voyage Class)
Transformers Generations War for Cybertron WFC-E22 Earthrise Voyager Quintesson Judge
$39.99
Features:
This WFC Earthrise (Voyager Class) is an official version in Chinese market, not KO. We got a few sets in stock.
Status:
2020-10 A few sets in stock.
Parameters:
Producer
Official
Size
N/A
Material
ABS Plastic
Shipment
From China
Note
N/A
4th Party Takara Tomy MP31 MP-31 Delta Magnus
$74.99
$94.99
Features:
This is a KO version of MP-31 Delta Magnus. Product photo is real shot. Generally the quality of this KO is decent (painting, joints) according to the feedback from our domestic customers. The main defect is that the quality of the plastic is still not as good comparing to the original MP31 version.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2020-8 A few sets in stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
KO Version
Takara Tomy Bayverse TLK-EX Optimus Prime Clear Version Japan 7-11 Limited Version
$43.99
$74.99
Features:
TLK Optimus Prime Clear version exclusively released for 7-11 chain store in Japan. We had a few sets with favorable price. It is made from unique transparent plastic and transforms into a truck.
*Note: there're two versions, with or without facemasks. We would send randomly.
Status:
2020-5 A few sets in stock.
Parameters:
Producer
Takara Tomy
Size
Unknown
Material
ABS Plastic
Shipment
From China
Note
Exclusive version for 7-11 Japan.
4th Party Takara Tomy MP40 MP-40 Target Master Hot Rodimus 19cm / 7.5"
$34.99
Features:
This is a KO version of MP-40 Targetmaster Hot Rodimus. Product photo is real shot. Generally the quality of this KO is decent (painting, joints). This set comes with a target master.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2020-5 A few sets in stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic
Shipment
From China
Note
KO Version
APC Toys APC-001 APC001 Attack Prime ( 1:1 TFP Optimus Prime Voyage Class ) 17cm / 6.7"
$49.99
Features:
Brought by APC Toys (A new 4th / 3rd party studio), this Attack Prime is made after the model of official TFP Optimus Prime, with new painting and more weapons.
Status:
2019-10 In stock
Parameters:
Producer
APC Toys
Size
N/A
Material
Plastic
Shipment
From China
Note
1:1 TFP Optimus Prime (Voyage Class)
Transformers Power of the Primes POTP Rodimus Prime
$49.99
$79.99
Features:
This POTP Rodimus Prime (Leader Class) is an official version in China's mainland market, not KO. We got a few stock with most favorable price.
Status:
2019-9 A few set in stock.
Parameters:
Producer
Official
Size
Same size as official version.
Material
ABS Plastic
Shipment
From China
Note
N/A
NB No-Brand LG07 LG-07 ( Equal to Classic 4.0 ) IDW Jetfire (Leader Class, Non-Official Version)
$35.99
Features:
This No-Brand figure is an KO version of the official LG07 Jetfire (Classic 4.0 Jetfire ). According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below:
Cons: Painting is not as good as the official version, a few batches would have problem in the ratchet joints on one arm (a little bit loose.)
** TFSAFARI would check if there's major defects of the toy before shipment but we are not able to offer post-sale service for this KO version on minor defects.
Status:
2019-8 In stock.
Parameters:
Producer
No Brand
Size
No data.
Material
ABS Plastic
Shipment
From China
Note
KO Version
NB No-Brand Shockwave 2011 DOTM Voyage Class KO Version
$32.99
Features:
This No-Brand figure is KO version of the official 2011 DOTM Bayverse Shockwave.
Pros:
Cheap with original box.
Almost the same quality as the official released version.
Cons:
None
Parameters:
Producer
No Brand
Size
Voyage Class
Material
ABS Plastic
Shipment
From China
Note
KO Version
Transformers Power of the Primes POTP Optimal Optimus
$49.99
Features:
This POTP Optimal Optimus
Parameters:
Producer
Official release
Size
N/A
Material
ABS Plastic
Shipment
From China
Note
Not KO
NB No-Brand IDW Combiner Wars CW Devastator 6 in 1 Set (Minified Non-Official Version, No Box) 32cm / 12.5"
$39.99
$52.99
Features: This No-Brand figure is an Minified KO version of the official IDW Devastator. The toy would be sent without original box to guarantee the best price. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below: Pros: - No simplification on all the transformation process. - Minified size is now easier to handle and more compatible to other official combiners from Combiner Wars, Titans Return and POTP series- Quite good joints, no rickets. Cons: - Plastic used for the legs and arms is not as good as the official version.- Factory doesn't offer any post-sales service (For broken parts and spare parts you need to figure out it by yourself, due to its low price, TFSAFARI can't be responsible for the post-sales service.). - The hand of the scrapper is easily broken in some batches. See below link the way to fix...