
4th Party RP44 KO FT44 Thomas (Astrotrain MP size) 24cm / 9.5"
$99.99
$119.99
Features:
You know better than us what it is.
This RP-44 KO version has been proved to be of good quality and has few difference comparing to the original version.
The comparison photos are shown in the product gallery (On the left is the original version and on the right is the RP44 KO version.)
Quick Transformation Video:
Status:
2024-7 Reissue batch in stock.
Parameters:
Producer
Fanstoys (FT)
Size
Robot Form Approx. 24cm (9.5 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
MP size Astrotrain.
BMB Black Mamba LS-03F LS03F (KM01S/ KM-01S)Ovsersized Bayverse Optimus Prime 32cm
$99.99
$129.99
Features:
*Note:Current batch is with the “KM-01S”code.
3*Lr41 batteries are needed for the Ion blaster
This LS03F (Oversized MPM04) by Black Mamba (one of the best 3rd / 4th party transformer producer) is the upgraded version of LS03.
More detailed painting added to the body comparing to MPM04
Shoulders and Chest re-adjusted to make the whole figure more coordinated and closer to the image in the movie.
Upgraded Alloy / Diecast parts. (Shoulders, Feet, make them less vulnerable in transformation)
Replaceable Rubber Tyres, More accesories and weapons (Blades, Hooks, Axe, Pistols )
This one can be a special addition to your TF showcase.
Status
2022-5 New batch in stock.
Parameters
Producer
Black Mamba (BMB)
Size
Robot Form Approx. 32cm (13 Inches) Tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
Upgraded version of LS03, Oversized version of MPM04
4th Party No brand MP size Trailer / Convoy (KO Version fit to MP size Optimus Prime)
$49.99
$64.99
Features:
This trailer is of MP size, fitting to all MP size Optimus figures like OPs from TE, Magic Square and etc, see photos for details. The set comes with accessories on the photos (roller and etc.)
*This trailer doesn't include the main figure of MP10 Optimus Prime, pls check the store to buy the main figure separately.
The trailer is packed and sent in neutral packing (no colorful cupboard box)
Status:
2023-10 A few sets in stock.
Parameters:
Producer
No brand
Size
Adapt to MP size Optimus Prime
Material
ABS Plastic + Alloy
Shipment
From China
Note
Fit to all MP size OP (TE, Magic Square)
4th Party NB No-Brand Not MP33 MP-33 Inferno & Not MP35 MP-35 Grapple (Non-Official Version)
$47.99
$64.99
Features:
*Note: There're 2 buy options in this page, pls make sure you place the right item you want into the shopping cart.
These 2 No-Brand figures are KO versions of the official MP-33 and MP-35.
Status:
2022-5 New batch in stock.
Parameters:
Producer
No Brand
Size
MP Size
Material
ABS Plastic
Shipment
From China
Note
KO Version
4th Party No Brand T-11 T11 Oversized MPM11 MPM-11 Ratchet 22cm / 8.7"
$74.99
$84.99
Features:
*Note
Battery Type:
2 x LR521 for headlights
2 x LR41 for the blaster
This is an OVERSIZED KO version of the MPM11 Ratchet from the official line, with enhanced details on painting.
Status:
2024-5 New batch in stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 22cm (8.7 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
No Brand NB White Leg Version 4th Party KO MP44 MP-44 OP 3.0 Loose Pack Version (Backpack Modified Version, No box, No manual,No Jetpack) 25cm / 10"
$76.99
$99.99
Features: *Note: This is the latest version with the backpack modified and white legs. There is no Jetpack with current version This is is a 4th party KO version of MP44 OP 3.0. No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected. The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros: - No simplification in structure and transformation. 1:1 full version KO. - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced. - Light effect added to the jet pack. Cons - Plastic material used are not as good as the official version. - Still the hip joints are loose on some sets (same to official version) - On some figures, Some...
4th Party Legendary Toys BS-02 BS02 KO UT Ragoon (AOE / TLK Megatron)
$74.99
$89.99
Features:
*Note:
(1) Batteries might be removed for convenient in shipment.
Battery Type:
2 x LR41 for the head
2 x LR41 for the blaster
(2) We offer different buy options for this product, for loose pack product the outer color box would be removed while we still offer good protection for the figure.
This is the KO version of UT R03 Ragoon with some modification and improvements. It is probably done by BMB. The size would be the same as the UT R03 Ragoon (a little bit shorter to fit better in size. ).
Status Update:
2024-7 Reissue batch in stock.
Parameters:
Producer
4th Party, Black Mamba
Size
Robot Form Approx. 32cm (12 Inches) Tall
Material
ABS + Diecast / Alloy parts
Shipment
From China
Note
Bayverse TLK Megatron
BMB Black Mamba LS-03 LS03 (KM01 / KM-01)Optimus Prime (Oversized OS MPM04) 32cm / 13"
$84.99
$119.99
Features:
*Note: On the current batch the product code of this set would be changed from LS03 to KM01
BMB's LS03 OP is an oversized MPM04 version by BMB Black Mamba (One of the best 4th / 3rd party transformer producer) with upgrades as below:
More detailed painting added to the body.
Shoulders and Chest re-adjusted to make the whole figure more coordinated and closer to the image in the movie.
Upgraded Alloy / Diecast parts. (Shoulders, Feet, make them less vulnerable in transformation)
Replaceable Rubber Tyres, More accesories and weapons (Blades, Hooks, Axe, Pistols )
This one can be a special addition to your TF showcase.
Status:
2024-4 Reissue batch in stock.
Parameters:
Producer
Black Mamba (BMB)
Size
Robot Form Approx. 32cm (13 Inches) Tall
Material
ABS Plastic + Alloy
Shipment
From China
Note
Oversized version of MPM04
【Loose Pack】4th Party TFP Commander Class NOT Optimus Prime / Megatron / Ultra Magnus / Bulkhead / Ironhide 10cm / 4"
$19.99
$24.99
Features:
1. These should be 1:1 KO products and would be shipped WITHOUT the origional box.
2. Comparing to the original version there might be some minor defects as below:
(1) Some joints might be loose and you need to strengthen them by yourself.
(2) The coating on some parts are a little bit overflowed.
Status:
2022-3 In stock.
Parameters:
Producer
4th Party
Size
10cm / 4"
Material
Plastic
Shipment
From China
Note
1:1 KO
4th Party MW Model Wizard T-10S T10S Earthquake Star Sky Wings ( NOT Oversized MPM10 Starscream ) Seibertron Color Version 34cm / 13"
$119.99
Features:
Note: This is the Seibertron Color version of T10
Brought by Model Wizard (MW) Studio (A new 4th party transformer producer, said to be the avatar of Weijiang), This T10 Earthquake Star Sky Wing, is an oversized version of the official MPM10 Starscream with enhanced painting details and alloy parts added.
The figure features:
- Matte grey painting;
- LED eye lights;
- Fully articulated hands;
- Enhanced details on the head.
Status:
2022-3 New batch in stock
Parameters:
Producer
Unknown
Size
Robot Form Approx. 33cm (13 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Oversized version of MPM10
No Brand NB 4th Party KO MP49 MP-49 Black Convoy (Nemesis Prime) Neutral Packing Version 25cm / 10"
$99.99
$124.99
Features: This is is a 4th party KO version of MP49 Black Convoy (Black OP 3.0) No formal packing for this set. It is probably manufactured by BMB so good post-sales service can't be expected. The below are pros and cons of this KO set based on the feedback from our domestic customers in China: Only some accessories are included. Convoy is not included. Pros: - No simplification in structure and transformation. 1:1 full version KO. - No major or common defects are found in bulk. - Joints on knees and ankles are enhanced. - Light effect added to the jet pack. Cons - Plastic material used are not as good as the official version. - Still the hip joints are loose on some sets (same to official version) - On some figures, Some parts don't fit precisely,seams can be found on robot mode. (like inner parts of the...
4th Party BMB BS-03 BS03 KO UT R02 R-02 Challenger (AOE / TLK Optimus Prime) 28cm / 11"
$89.99
$119.99
Features:
*Note:
(1) Current stock comes with the with new metal shoulder joints which is pre-installed or as replacement which is stronger and more durable.
(2) Batteries might be removed for convenience in the shipment.
Battery Type: 5 x LR41 (For LED Eyes & Blaster)
This is the KO version of UT R02 Challenger with some modification and improvements. It is probably done by BMB. The size would be the same as the UT R02 Challenger (Optimus Prime) .
Status Update:
2024-6 Reissue batch in stock.
Parameters:
Producer
4th Party, Black Mamba
Size
Robot Form Approx. 28cm (11 Inches) Tall
Material
ABS + Diecast / Alloy parts
Shipment
From China
Note
Bayverse TLK Optimus Prime
4th Party NB No-Brand Not MP20 MP-20 Wheeljack & Not MP23 MP-23 Exhaust (Non-Official Version)
$29.99
$32.99
Features:
*Note: This product link contains different buy options. Pls make sure you choose the right one you want.
These 2 No-Brand figures are KO versions of the official MP-20 and MP-23. According to all the reviews by our domestic customers, the pros and cons of this KO figure is as below:
Pros: No simplification on all the transformation process. Almost no large seams in the vehicle mode (better than most of the KO figures.) Cons: Painting is a little bit thin. The knee joints of some figures may be a little bit loose.The wheels of some figures may not rotate smoothly.
Status:
2021-11 New batch in stock.
Parameters:
Producer
No Brand
Size
MP Size
Material
ABS Plastic
Shipment
From China
Note
KO Version
AOYI LS-06 LS06 Megatron (Oversized Studio Series SS13 SS-13) BMB Black Mamba 33cm
$84.99
$109.99
Features: BMB's LS-06 Megatron (transforms to tank) is an oversized SS13 version by BMB Black Mamba (AOYI)(One of the best 4th / 3rd party transformer producer) with upgrades as below: - Whole robot form oversized to 33cm with more detailed painting added, it's now a collectible rather than a toy comparing to SS-13 - With LED added, eyes and hand cannon can now glow. - Replaceable right hand (for the hand cannon) - Movable fingers added on both two hands. This one can be a special addition to your TF showcase. *This toy is extremely heavy so to guarantee most economic and fast way of delivery we suggest to send w/o original box. The product would still be well packed by ourselves. Status: 2023-6 New batch in stock. Parameters: Producer Black Mamba (BMB) / AOYI Size Robot Form Approx. 33cm (13 Inches) Tall Material ABS Plastic Shipment From China Note Oversized version...
4th Party MW Model Wizard T-10 T10 Earthquake Star Sky Wings ( Oversized MPM10 Starscream ) 34cm / 13"
$89.99
$119.99
Features:
Brought by Model Wizard (MW) Studio (A new 4th party transformer producer, said to be the avatar of Weijiang), This T10 Earthquake Star Sky Wing, is an oversized version of the official MPM10 Starscream with enhanced painting details and alloy parts added.
The figure features:
- Matte grey painting;
- LED eye lights;
- Fully articulated hands;
- Enhanced details on the head.
Status:
2021-11 New batch in stock
Parameters:
Producer
Unknown
Size
Robot Form Approx. 33cm (13 Inches) Tall
Material
ABS Plastic + Alloy / Diecast
Shipment
From China
Note
Oversized version of MPM10
4th Party BX001 BX-001 Bayverse Optimus Prime (1:1 KO MPM04) 25CM /10"
$69.99
$99.99
Features:
1:1 KO version of MPM04 OP with die-cast parts added.
According to the feedback of our domestic customers, this set is of decent quality, well the painting might be a little bit plain.
Status:
2021-10 A few sets In stock.
Parameters:
Producer
Legendary Toys ( LT )
Size
Robot Form Approx. 25cm (10 Inches) Tall
Material
ABS Plastic + Diecast parts
Shipment
From China
Note
1:1 KO MPM04
4th Party No Brand KO MPM05 MPM-05 Barricade
$49.99
$54.99
Features:
This is a 1:1 KO version of the MPM05 Barricade from the official line, with no modification.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2022-5 New batch in stock.
Parameters:
Producer
N/A
Size
Same as official MPM05 Barricade
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
Legendary Toys 4th Party BS-02S BS02S KO UT Ragoon (AOE / TLK Megatron) Battle Damaged Version 32cm / 12"
$99.99
Features:
Note: This is battle-damaged version of BS-02 with a weathered painting version.
This is the KO version of UT R03 Ragoon with some modification and improvements. It is probably done by BMB. The size would be the same as the UT R03 Ragoon (a little bit shorter to fit better in size. ).
Status Update:
2021-10 New batch in stock.
Parameters:
Producer
4th Party, Black Mamba
Size
Robot Form Approx. 32cm (12 Inches) Tall
Material
ABS + Diecast / Alloy parts
Shipment
From China
Note
Bayverse TLK Megatron
No Brand 4th Party JH01 JH-01 KO MPM11 MPM-11 Ratchet Green Version ( Enhanced Details & Painting) 19cm / 7.5"
$79.99
$89.99
在Features:
Note: This is the green color version. You can find the original color version in the below link:
NO BRAND JH01 JH-01 KO MPM11 MPM-11 RATCHET
This is a 1:1 KO version of the MPM11 Ratchet from the official line, with enhanced details on painting.
*Note: Except for major defects, post-sale service of KO products can't be guranteed by us.
Status:
2021-5 New batch in stock.
Parameters:
Producer
N/A
Size
Robot Form Approx. 19cm (7.5 Inches) Tall
Material
ABS Plastic + Diecast
Shipment
From China
Note
KO Version
WJ Weijiang 4th Party Oversized SS05 Optimus Prime 29cm / 11"
$74.99
Features:
Important Note:
*No post-sale service unless there's major defect for this figure
This is an oversized version with alloy parts added of SS05 Optimus Prime from the official line. Still the best quality of WJ is inherited.
Status:
2021-9 New batches in stock.
Parameters:
Producer
WJ
Size
29cm / 11"
Material
ABS Plastic
Shipment
From China
Note
Oversized KO version